User manual

36
8. Setup and connection
a) Setup
• Ensure that the turntable is located near to a mains socket.
• When choosing a location for the turntable, avoid direct sunlight, vibrations, dust, hot and cold temperatures and
damp environments. Do not use powerful transformers or motors in the vicinity of the product.
• Place the turntable on a stable, horizontal surface.
• Keep the turntable away from speakers to prevent acoustic feedback.
• Placetheturntableonanelevatedsurfaceawayfromtheoor.
b) Connecting external devices to the LINE OUT cinch sockets
Ifyouwishtoconnectanexternalamplierandspeakers,followtheinstructionsbelow:
Ensure that the power adapter is unplugged from the mains socket before connecting the turntable
totheamplier.Switchofftheamplierandensurethatitisdisconnectedfromthemains(unplug
the power adapter).
 Onlyuseshieldedcinchcablestoconnecttheampliertothecinchsockets.Othercablesmay
cause interference.
Only connect the RCA sockets to devices with RCA inputs, otherwise the turntable may be damaged
due to acoustic distortion.
Ensure that you connect the cables to the correct sockets (connect the left audio cable to the left socket
and the right audio cable to the right socket).
• Connect the LINE OUT Rsocket(27)totheright-handinputontheamplier.
• Connect the LINE OUT Lsocket(28)totheleft-handinputontheamplier.
c) Connecting external audio devices
• Connect the AUX IN socket (5) to the line-out/headphone socket on an external audio device.
• If necessary, use a suitable adapter.
d) Connecting a pair of headphones
• Insert the 3.5 mm jack plug on your headphones into the headphone socket (6).
The built-in speaker is automatically disabled when headphones are inserted.