User manual

38
9. Using the turntable
Only use the turntable when you have familiarised yourself with its features and these operating
instructions.
Check that all cables are connected properly.
a) Basic features
• Press the STANDBY/VOLUME wheel (24) to turn the turntable on or off.
• Turn the STANDBY/VOLUME wheel (24) to adjust the volume.
• The STANDBY indicator (16) turns on when the turntable is switched off.
• Select a playback source by touching the CD/USB (22), PHONO/AUX (20), TUNER/BAND (21) or TAPE (23)
buttons.
Press the CD/USB button (22) to switch between CD and USB mode.
Press the PHONO/AUX button (20) to switch between the turntable or the external AUX IN input (5).
Press the TUNER/BAND button (21) to switch between AM and FM radio.
• Press the EQ button (19) to change the equaliser setting. The equaliser changes the sound of the
audio from the playback source (e.g. CD player or USB memory stick). You can choose from 5 settings
(FLAT>ROCK>POP>JAZZ>CLASSIC).
• Press the REC./DEL.button(18)torecordanddeletemusicles.
b) Setting the time
• When the turntable is in standby mode (the STANDBY LED (16) must be on), press and hold the MODE/CLK
button(14)for3–5secondsuntil"12HOUR"or"24HOUR"ashesontheLCDdisplay(15).
• Turn the TUNING/SKIP wheel (8) to select the desired time format (12 HOUR or 24 HOUR).
• Press the MODE/CLKbutton(14)toconrmyourselection.
• Turn the TUNING/SKIP wheel (8) to set the hour value.
• Press the MODE/CLKbutton(14)toconrmyourselection.
• Turn the TUNING/SKIP wheel (8) to set the minute value.
• Press the MODE/CLKbutton(14)toconrmyourselection.
c) Setting the alarm
• Set an alarm to switch the turntable on at a preset time. You can set the playback source to "TUNER" (radio), "CD"
or"USB"(USBmemorystickwithMP3les).
• Congurethealarmasfollows:
ON time > OFF time > playback source > alarm volume