User manual

i) Using the turntable

Before using the turntable, remove the needle cap from the cartridge.

 Openthetonearmclamp.Afteruse,placethetonearmbackintotheclampandxitinplace.

• Press the PHONO/AUX button (20) to switch to turntable mode. "PHONO" will appear on the LCD display.

• Use the speed switch (33) to select the correct turntable speed for your record. You can choose from 33, 45, or

78 rpm.

• Move the AUTO STOP switch (32) to the desired position:

- "OFF": The turntable keeps turning (provided that turntable mode is selected).

- "ON":Theturntablestopsautomaticallywhenplaybackhasnished.

The auto-stop feature may not work properly for records with a non-standard lead-out groove. If your record

has a non-standard lead-out groove, set the AUTO STOP switch (32) to the "OFF" position and switch off

theturntablemanuallywhenplaybackhasnished(presstheSTANDBY/VOLUME wheel, or move the

AUTO STOP switch to the "ON position).

• Place the record onto the turntable (29). If necessary, use the single puck (30). If you are using a 45 rpm record,

place the single puck (30) in the centre of the turntable.

• Lift the tonearm (34) using the tonearm lift (31), and then swivel the tonearm until it is above the record. The

turntable will start to rotate.

• Carefully lower the tonearm (34) onto the record using the tonearm lift (31). Playback will start.

• If the AUTO STOPswitch(32)isinthe"ON"position,theturntablewillstoprotatingwhenplaybackhasnished.

• Lift the tonearm (34) using the tonearm lift (31), and then swivel the tonearm back into its original position.

• If the AUTO STOPswitch(32)isinthe"OFF"position,orifyouwishtoendplaybackbeforetherecordhasnished,

lift the tonearm (34) using the tonearm lift (31) and swivel it back into its original position.

j) Playing audio from an external device

• The external audio source must be connected to the AUX IN socket (5) (see "Connecting external audio devices").

• Press the PHONO/AUX button (20) to switch to auxiliary mode ("AUX" will appear on the LCD display).

• Start the audio playback on the connected device.

• Soundwillbeplayedthroughthebuilt-inspeakerorheadphones.Youcanconnectanampliertotheheadphone

socket (optional).