User manual

ManualsBrandsRENKFORCE ManualsHeadphonesBluetooth® (1075101) Sports Stereo headset TH-BT71

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).

All rights including translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the capture in

electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.

This publication represent the technical status at the time of printing.

b) Switching on/off

• Press the button (1) for about 3 seconds to switch the headset on or off.

• The LED indicators (5) lights up blue once every 6 seconds when the headset is switched on.

The LED indicator (5) lights up blue 3 times every 6 second when a connection to a

Bluetooth

device does not exist.

• The LED indicator (5) does not light up when the headset is switched off.

c) Pairing

Before it is possible to transmit between your Bluetooth

device and the headset, both devices

must be coupled with each other. This process is called „pairing“.

When there is already a connection to a Bluetooth

device, it will be automatically

resumed as soon as both devices are within range and switched on. To enable this

automatic reconnection, this function may need to be activated on the Bluetooth

device (please inform yourself on this point in the instructions for your Bluetooth

device).

• Press and hold the button (1) for 6 seconds, until the LED indicator (5) ashes blue/red.

• Turn on your Bluetooth

device with which the headset is to be connected, and activate

pairing mode here (for more information, see the instruction manual of the corresponding

device). Now the device searches for Bluetooth

devices in the reception range.

• When the headset is found, your Bluetooth

device displays its name (TH-BT71).

• Select the headset in your Bluetooth

device.

• A code (0000) might have to be entered during pairing.

• After a successful pairing process, the LED indicator (5) ashes blue once every 6 seconds.

d) General Operation

Function Operation

Switching on/off

Press the button (1) for 3 seconds

Pairing

Press the button (1) for 6 seconds

e) Use as a hands-free system

Function Operation

Accept a call

Press the button (1) briey

Reject a call

Press and hold the button (1)

End a call

Press the button (1) briey

Redial

Press the button (1) 2x briey

f) Music playback

Function Operation

Interrupting playback

Press the button (1) briey

Continue playback

Press the button (1) briey

Track jumps forward

Press the button (2) briey

Track jumps backwards

Press the button (3) briey

Increases the volume

Press and hold the button (2), a signal sounds at full

volume

Decreases the volume

Press and hold the button (3), a signal sounds at mini-

mum volume

Care and cleaning

Do not use abrasive cleaning agents, cleaning alcohol or other chemical solutions

since these could damage the housing or even impair operation.

• Use a dry, lint-free cloth to clean the headset.

• The ear plugs can be removed from the headphones for cleaning.

Troubleshooting

The headphones do not respond to button commands, stop playback automatically, or

cannot be turned on

• The battery is discharged, please recharge completely.

No sound

• The volume on the Bluetooth

device is set to minimum.

• The Bluetooth

pairing is no longer available; repeat the pairing process.

• The operating range (max. 10 m) was exceeded.

In the sound playback there are dropouts

• The operating range (max. 10 m) was exceeded.

• Nearby there are other devices interfering with the radio transmission. Increase the distance

to radio-controlled devices or devices that have a high level of interference (strong electric

motors, uorescent lamps, microwaves, etc.).

Disposal

Electronic devices are recyclable material and do not belong in the household

waste. Dispose of an unserviceable product in accordance with the relevant statu-

tory regulations.

The built-in rechargeable battery cannot be removed and must therefore be dis-

posed along with the device.

Technical data

Charging voltage ..................................5 V/DC (USB)

Rechargeable battery ...........................Lithium battery, 3.7 V/70 mAh

Operating time ......................................approx. 5 h (by 50% volume)

Standby time .........................................approx. 150 hours

Charging time .......................................approx. 1.5 hours

Frequency range ..................................20 – 20000 Hz

Transmission frequency........................2.4 GHz

Transmission power..............................0.22 mW

Range ...................................................approx. 10 m

Bluetooth

version ................................4.1

Bluetooth

proles ................................A2DP / AVRCP / HSP / HFP

Weight ..................................................13 g

Operation/storage conditions ................temperature -10 °C to +50 °C

Declaration of conformity (DOC)

We, Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau, hereby declare that this

product conforms to the 2014/53/EU directive.

The full text of the EU conformity declaration is available via the following Internet

address: www.conrad.com/downloads

Select language by clicking a ag symbol and enter the order number of the product

in the search eld; then you will be able to download the EU declaration of conform-

ity in PDF format.