User manual
35
c) Mains Connection
Before plugging in the mains plug, ensure that the device voltage indicated at the device cor-
responds to the available mains voltage. Do not connect the device if the indication does not
correspondtotheavailablemainsvoltage.Wrongsupplyvoltagewillcauseseriousdamage.
Be careful when handling mains cables and mains connections. Mains voltage may cause poten-
tially fatal electric shock.
The mains socket to which the device is connected must be easily accessible so that it can be
quickly separated from the voltage/current supply in case of an error.
The CD player and all connected devices must be switched o when the mains voltage is con-
nected.
Make sure that no cables lie around openly. Install cables professionally to prevent accidents.
Make sure that all electrical connections and connection cables between the dierent devices
and any extension cables comply with the regulations and the operating instructions. If an exten-
sion line is used, ensure that it is designed for the respective load.
• SwitchotheCDplayerviatheon/oswitchonthefront(seealsochapter9,positionA).
In the deactivated position, the button of the on/o switch protrudes a little farther from the de-
vice than in the activated position.
• PlugthemainsplugoftheCDplayerintoapropermainssocketofthepublicmains.
d) Headphones Output
There is a headphones socket (B) on the front of the CD player. Connect suitable stereo headphones here.