Instructions
66
b) Function "Schedule Recording"
Thescreen/DVRcanautomaticallyrecordatspecictimesoronlyonspecicweekdays,e.g.onTuesdays,6AMto
12 PM and 6 PM to 9 PM. Several times per day and different settings per radio camera are possible.
Proceed as follows:
• Brieypushthe"Menu"button(5)onthescreen/DVRorthe"MENU"buttonontheIRremotecontrol.Thenthe
main menu is displayed.
• Use the "
" or the " "buttontoselectthesubmenu"RecordSetting"andthenbrieypushthe" " button.
• Use the "
" or the " "buttontoselectthefunction"ScheduleRecording"andthenbrieypushthe" " button.
• The "
" or the " " button can be used to display the already-present recording periods for the 7 weekdays.
• To set or change recording times, push the "
" or the " " button; "Modify" will be highlighted in colour. Then
brieypushthe" " button.
• Use the "
" or the " " button to select the desired radio camera ("Cam1", "Cam2", "Cam3" or "Cam4") and then
brieypushthe" " button. The selected radio camera is highlighted in colour.
You can also select more than one radio camera. The following programming of the recording periods then
applies to all selected radio cameras at the same time. This way, time-consuming programming of every
individual camera is not necessary.
• Use the "
" or the " " button to get to the setting of the start and end time and the weekdays.
• Set the start and end times for the recording period with the "
" or the " " buttons. Keep the respective button
pressed for quick adjustment.
Selectthedesiredweekdaysbyrstselectingtheweekdaywiththe"
" or the " "buttonandthenbrieypushing
the " " button. A selected weekday is marked in colour.
You can also select more than one weekday. The programming of the recording periods then applies to all
selected weekdays at the same time.
• In order to save the settings for the recording period, use the "
" or the " " button to select the "SET" button and
thenbrieypushthe" " button.
• In order to delete the settings for the recording period, use the "
" or the " " button to select the "DEL" button and
thenbrieypushthe" " button.
• ToswitchonemenulevelbackortoleavetheOSDmenu,brieypushthe"Menu"button(5)onthescreen/DVRor
the "MENU" button on the IR remote control (you may need to push it several times).
If you want to program two periods for one day (e.g. 6 AM - 10 AM and 6 PM - 10 PM), program the period
6AM-10AMrstasdescribedabove.Thenstartprogrammingagainandsettheperiod6PM-10PM.