Instructions
68
d) Function "File Section"
Here,youcansethowlongthevideolesonthememorycardaretobe.Iftherecordingcontinuesformorethan
thesettime,thescreen/DVRwillsetupseveralles(e.g.ifyouset5minutes,thiswillresultin12lesintotalata
recording duration of 1 hour).
Writing errors on the memory card or other causes will not cause the entire recording to be lost.
Proceed as follows:
• Brieypushthe"Menu"button(5)onthescreen/DVRorthe"MENU"buttonontheIRremotecontrol.Thenthe
main menu is displayed.
• Use the "
" or the " "buttontoselectthesubmenu"RecordSetting"andthenbrieypushthe" " button.
• Use the "
" or the " "buttontoselectthefunction"FileSection"andthenbrieypushthe" " button.
• Set the desired duration with the "
" or the " " button (5, 10 or 15 minutes).
• Conrmthesettingbypushingthe"
"buttonbriey.
• The screen/DVR then switches back to the previous menu.
• ToswitchonemenulevelbackortoleavetheOSDmenu,brieypushthe"Menu"button(5)onthescreen/DVRor
the "MENU" button on the IR remote control (you may need to push it several times).
e) Function "File Overwrite"
This function is used to pre-set what happens if the memory card used is full.
Proceed as follows:
• Brieypushthe"Menu"button(5)onthescreen/DVRorthe"MENU"buttonontheIRremotecontrol.Thenthe
main menu is displayed.
• Use the "
" or the " "buttontoselectthesubmenu"RecordSetting"andthenbrieypushthe" " button.
• Use the "
" or the " "buttontoselectthefunction"FileOverwrite"andthenbrieypushthe" " button.
• Use the "
" or the " " button to switch between "YES" (overwrite) and "NO" (cancel recording).
“YES" = If the memory card is full, the respective oldest recording will automatically be overwritten
“NO" = If the memory card is full, recording is no longer possible
• Conrmthesettingbypushingthe"
"buttonbriey.
• The screen/DVR then switches back to the previous menu.
• ToswitchonemenulevelbackortoleavetheOSDmenu,brieypushthe"Menu"button(5)onthescreen/DVRor
the "MENU" button on the IR remote control (you may need to push it several times).