User manual

e) Single/Quad mode

The "Quad" button (9) on the screen/DVR or the "QUAD" button on the IR remote control can be used to manually

switch between the different display modes.

Single mode

Theselectedchannel(1,2,3or4)isdisplayedpermanently.Bybrieypushingthe" " or the " " button on the

screen/DVR or the IR remote control you can manually switch to a different channel. The top left of the display shows

the associated channel number of the currently active channel.

Unused channels can be deactivated in the OSD menu (e.g. if you only operate two radio cameras at chan-

nels 1 and 2, channels 3 and 4 can be deactivated; the arrows can then only be used to switch between

channels 1 and 2).

Quad mode

All four channels are displayed at once. The displays are reduced to 1/4 of the regular size. The top left of each small

image shows the associated channel number.

If you only have signed on two radio cameras to the screen/DVR, you can deactivate the unused channels

3 and 4 in the OSD menu. In this case, the pictures of channels 1 and 2 will be shown side by side.

f) Starting/Terminating recording manually

Push the "Rec" (6) button on the screen/DVR or the button "REC/STOP" on the IR remote control to start or terminate

the recording.

 Whenarecordingisrunning,thedisplayshowsaashing"•REC"symbol.Someoperatingfunctionsare

not available during a recording.

g) Display of signal strength

If only a single channel is displayed (not in quad mode), a symbol for the display of the signal strength appears at the

upper left of the display. The more dashes are visible, the stronger the signal is received.

h) Display of the recording quality

If only a single channel is displayed (not in quad mode), a symbol for the display of the recording quality appears at

the upper left of the display.

"VGA" = VGA resolution (640 x 480)

"HD" = HD resolution (1280 x 720)