User manual

64
16. Submenu "Record setting"
a) Function "Record mode"
The screen/DVR can perform recordings either time-controlled (e.g. only weekdays, 10 PM to 6 AM), by motion detec-
tion (if the picture content of the radio camera changes) or manually (by pushing a button).
Programming of the periods for timed recording is described in chapter 16. b); settings of the sensitivity at
motion detection can be found in chapter 16. c).
Proceed as follows:
• Brieypushthe"Menu"button(5)onthescreen/DVRorthe"MENU"buttonontheIRremotecontrol.Thenthe
main menu is displayed.
• Use the " " or the " "buttontoselectthesubmenu"RecordSetting"andthenbrieypushthe" " button.
• Use the " " or the " "buttontoselectthefunction"RecordMode"andthenbrieypushthe" " button.
• Use the " " or the " " button to select one of the four channels ("cam 1", "cam 2", "cam 3" or "cam 4").
• Set the desired function for each of the radio cameras with the " " or the " " button.
"Schedule": Timed recording
"Motion": Recording at motion
"Manual": Manual recording by pushing a button
• Conrmthesettingbypushingthe" "buttonbriey.
• The screen/DVR then switches back to the previous menu. If you want to change the recording function for another
channel, proceed as described above.
• ToswitchonemenulevelbackortoleavetheOSDmenu,brieypushthe"Menu"button(5)onthescreen/DVRor
the "MENU" button on the IR remote control (you may need to push it several times).