User manual

- 47 -
BIOS Setup
2-6 Peripherals
& IOMMU
 EnablesordisablesAMDIOMMUsupport.(Default:Disabled)
& OnChip SATA Channel
 EnablesordisablestheintegratedSATAcontrollers.(Default:Enabled)
& OnChip SATA Type
 EnablesordisablesRAIDfortheSATAcontrollersintegratedintheChipsetorcongurestheSATAcontrollers
to AHCI mode.
NativeIDE CongurestheSATAcontrollertoIDEmode.
RAID Enables RAID for the SATA controller.
AHCI   CongurestheSATAcontrollerstoAHCImode.AdvancedHostControllerInterface
(AHCI)isaninterfacespecicationthatallowsthestoragedrivertoenableadvanced
SerialATAfeaturessuchasNativeCommandQueuingandhotplug.(Default)
& OnChip SATA Port4-7 Type (SATA3 4~SATA3 6 and eSATA connectors)
 ThisoptioniscongurableonlywhenOnChip SATA Type is set to RAID or AHCI.Congurestheoperating
mode of the integrated SATA3 4~SATA3 5 connectors.
As SATA Type The mode depends on the OnChip SATA Type settings.(Default)
IDE   DisablesRAIDfortheSATAcontrollerandcongurestheSATAcontrollertoIDEmode.
& OnChip USB Controller
 EnablesordisablestheintegratedUSBcontroller.(Default:Enabled)
& HD Audio Azalia Device
 Enablesordisablestheonboardaudiofunction.(Default:Enabled)
If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to
Disabled.
& Onboard LAN Controller
 EnablesordisablestheonboardLANfunction.(Default:Enabled)
 Ifyouwishtoinstalla3rdpartyadd-innetworkcardinsteadofusingtheonboardLAN,setthisitemto
Disabled.