User manual

- 49 -
BIOS Setup
SB PCIe Slot Video Sets the PCI Express graphics card on the PCI Express slot controlled by the
SouthBridgeastherstdisplay.
& Integrated Graphics
Enables or disables the onboard graphics function.
Auto The BIOS will automatically enable or disable the onboard graphics depending on
thegraphicscardbeinginstalled.(Default)
Disabled Disables the onboard graphics.
Force Always activates the onboard graphics, whether or not a PCI Express card is
installed.
& UMA Frame Buffer Size
 ThisitemiscongurableonlywhenIntegrated Graphics is set to Force.Framebuffersizeisthetotal
amount of system memory allocated solely for the onboard graphics controller. MS-DOS, for example, will
useonlythismemoryfordisplay.Optionsare:Auto(default),256M,512M,1G,2G.
` ATA Port Information
This section provides information on the device connected to each SATA port controlled by AMD Chipset.
` SATAConguration
& SATA Hot Plug on PORT0~SATA Hot Plug on PORT7
 EnablesordisablethehotplugcapabilityforeachSATAport.(Default:Disabled)
& SATA Power on PORT0~SATA Power on PORT7
 EnablesordisableseachSATAport.(Default:Enabled)