User manual

Conguring SATA Hard Drive(s)

- 60 -

C-2.ConguringLegacyRAIDROM

EnterthelegacyRAIDBIOSsetuputilitytocongureaRAIDarray.Skipthisstepandproceedwiththeinstallation

ofWindowsoperatingsystemforanon-RAIDconguration.

Steps:

After the POST memory test begins and before the operating system boot begins, look for a message which

lookslikethatinFigure8below.Press<Ctrl>+<R>toentertheRAIDBIOSsetuputility.

Figure 8

Creating a RAID Array

Tocreateanewarray,press<Enter>ontheCreate Arrayoption.(Figure9)

Figure 9

AMD-RAID Controller BIOS (6.1.1-00075)

Press <CTRL-R> to Congure.

* BIOS defaults restored. *

1--Legacy, 79GB, Normal (NA)

2--Legacy, 79GB, Normal (NA)

Disks

Available Keys

AMD-RAID Array Conguration (Build: 6.1.1-00075)

Creates an array from the connected disks

Arrays

0-00, 79GB, Ready

1-01, 79GB, Ready

Main Menu

License Level: 50

>=Choose, <Esc>=Back

<Enter>=Select Menu Item

Initialize Disk(s)

Create Array

Delete Array(s)

Swap Two Arrays

Manage Hot Spare(s)

View Disk Details

View Array Details

Rescan All Channels

Controller Options

Continue to Boot

Available Keys