User manual

Conguring SATA Hard Drive(s)
- 66 -
Figure 3
RefertothefollowingforinstallingthedriverduringtheWindowssetupprocess.
Step 1:
RestartyoursystemtobootfromtheWindowsXPsetupdiskandpress<F6>assoonasyouseethemessage
"Press F6 if you need to install a 3rd party SCSI or RAID driver." A screen will then appear asking you to specify
anadditionalSCSIadapter.Press<S>.
Step 2:
InserttheoppydiskcontainingtheSATARAID/AHCIdriverandpress<Enter>.Thenacontrollermenusimilar
to that in Figure 3 will appear. Select AMD AHCI Compatible RAID Controller-x86 platformandpress<Enter>.
Windows Setup
You have chosen to congure a SCSI Adapter for use with Windows,
using a device support disk provided by an adapter manufacturer.
Select the SCSI Adapter you want from the following list, or press ESC
to return to the previous screen.
ENTER=Select F3=Exit
AMD AHCI Compatible RAID Controller-x86 platform
AMD AHCI Compatible RAID Controller-x64 platform
Step 3:
Onthenextscreen,press<Enter>tocontinuethedriverinstallation.Afterthedriverinstallation,youcanproceed
withtheWindowsXPinstallation.