User manual

ManualsBrandsRENKFORCE ManualsStorage MediaUSB smartphone/table card reader Silver

Compatible memory cards and capacities

• SDHC (max. 32 GB) / SDXC (max. 2 TB)

• microSD HC (max. 32 GB) / microSD XC (max. 2 TB)

• MMC (max. 2 GB)

Components

2 3

(The protective caps are removed in this diagram)

1 USB Type-C connector

2 microSD card slot

3 SD card slot

4 USB-A connector

5 Micro USB connector

6 (a, b) Latch

7 LED indicator

Connecting the card reader and transferring data

Insert the memory card into the correct card slot before connecting the card reader to your

computer or mobile device.

You can only read or write to one card at once.

The LED indicator (7) will turn on when you connect the card reader to your computer or mobile

device, or when data is being transferred.

Remove the protective cap(s) before use and replace them after disconnecting the card reader

from your computer or mobile device.

a) Connecting to a mobile device (e.g. smartphone or tablet) via OTG

• Insert a memory card into the correct card slot.

• If your device has a micro USB port, press the latch (6a) on the USB-A connector and pull out the micro

USB connector (5) until it clicks into place.

If your device has a USB Type-C port, use the USB Type-C connector (1).

• Connect the card reader to your mobile device using the micro USB/USB Type-C connector.

• Thememory cardshould bedisplayed inthe lemanager appon yourmobile device.Rememberto

unmount the memory card before disconnecting the card reader (if this option is available).

b) Connecting to a computer

• If the micro USB connector has been pulled out, press the latch (6b) on the front of the USB-A connector

and push the micro USB connector back into the USB-A connector until it clicks into place.

• Insert a memory card into the correct card slot.

• Connect the USB-A connector (4) to a USB 3.0 port on your computer.

If your computer has a USB Type-C port, you can connect the card reader using the USB Type-C connector.

• The memory card will be displayed as removable disk drives on your operating system. You can now

copy data to and from the card. To avoid losing your data, remember to unmount the memory card before

disconnecting the card reader.

Maintenance and cleaning

• Disconnect the product from the computer before cleaning.

• Do not immerse the product in water.

• Use a dry, lint-free cloth to clean the product.

• Do not use any abrasive or chemical cleaning agents.

• Replace the protective caps after use.

Disposal

Electronic devices are recyclable waste and must not be disposed of in the household waste. At

the end of its service life, dispose of the product according to the relevant statutory regulations.

 Youthusfullyourstatutoryobligationsandcontributetotheprotectionoftheenvironment.

Technical data

Power supply ........................................ 5 V/DC (via USB-A), max. 900 mA

5 V/DC (via OTG), max. 0.25 W

USB standard ....................................... Type-C / USB 3.0 (backwards compatible with USB 2.0/1.1)

Transmission rate ................................. max. 5 Gbps

System requirements ............................ Windows

XP (Home, Pro with SP1, SP2, SP3, 32-bit only),

Vista™ (32/64-bit), 7 (32/64-bit),8.0 (32/64-bit), 8.1 (32/64-bit),

10 (32/64-bit), RT

Mac OS X Yosemite or later

Android 5.0.2 or later

Operating conditions ............................. 0 to +40 ºC, 0 – 90 % RH

Storage conditions ................................ -10 to +50 ºC, 0 – 95 % RH

Dimensions (L x W x H) ........................81 x 24 x 11 mm

Weight ..................................................22 g

Operating instructions

OTG card reader

Item no. 1499585 (CR50e grey)

Item no. 1499586 (CR51e silver)

Intended use

This card reader is designed to read and write to different types of memory cards.

It can be connected to a mobile device (e.g. smartphone or tablet) via a USB OTG connection using the

built-in micro USB or USB Type-C™ connectors. You can also connect the card reader to a computer using

the USB Type-C™ or USB-A connectors.

For safety and approval purposes, you must not rebuild and/or modify this product. If you use the product

for purposes other than those described above, the product may be damaged. In addition, improper use can

causehazardssuchasshortcircuitsorre.Readtheinstructionscarefullyandkeepthem.Makethisproduct

available to third parties only together with its operating instructions.

This product complies with the statutory national and European requirements. All company names and

Delivery content

• OTG card reader with two USB protective caps

• Operating instructions

Up-to-date Operating Instructions

Download the latest operating instructions at www.conrad.com/downloads or scan the QR code above.

Follow the instructions on the website.

Explanation of symbols

The symbol with the exclamation mark in the triangle is used to highlight important information

in these operating instructions. Always read this information carefully.

The arrow symbol indicates special information and advice on operation.

Safety instructions

Read the operating instructions carefully and especially observe the safety information.

If you do not follow the safety instructions and information on proper handling in this

manual, we assume no liability for any resulting personal injury or damage to property.

Such cases will invalidate the warranty/guarantee.

• The device is not a toy. Keep it out of the reach of children and pets.

• Do not leave packaging material lying around carelessly. This may become dangerous playing

material for children.

• Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity,

moisture,ammablegases,vapoursandsolvents.

• Do not place the product under any mechanical stress.

• If it is no longer possible to operate the product safely, take it out of operation and protect it

from any accidental use. Safe operation can no longer be guaranteed if the product:

- is visibly damaged,

- is no longer working properly,

- has been stored for extended periods in poor ambient conditions or

- has been subjected to any serious transport-related stresses.

• Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage

the product.

• Also observe the safety and operating instructions of any other devices which are connected

to the product.

• Consult a technician if you are not sure how to use or connect the device.

• Maintenance, modications and repairs must only be completed by a technician or an

authorized repair centre.

• If you have questions which remain unanswered by these operating instructions, contact our

technical support service or other technical personnel.

Important information

• The card reader is backwards compatible with USB 2.0 and USB 1.1. Please note that USB 3.0 speeds

are only available if the connected device supports USB 3.0.

• You do not need to install any drivers.

• Refer to the section on connecting peripheral devices in the user manual for your computer/mobile device.

• If you have an older operating system: You may need to install a system patch for some memory

card formats (such as exFAT), otherwise your operating system may not recognize the memory card. For

details, refer to the instructions and latest update information for your operating system.

• You may damage the card reader or memory card if you insert a card in the wrong orientation.

• Before removing a memory card, unmount the card reader from your operating system to avoid losing or

corrupting your data or damaging the card reader. Refer to the instructions for your operating system for

more information.

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).

Allrights including translationreserved. Reproductionbyany method, e.g.photocopy,microlming, or thecapture in

electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.

This publication represent the technical status at the time of printing.