User manual

36
d) Operation in FM Mode
• Ifrequired,pushthebuttonFM/DAB(9)toswitchtoFMmode.
• Thedisplay(13)showsthetransmitterfrequency.
Manual station search
• PushoneoftheTUNING(12)buttonstoselectthedesiredstation.
• Everypushofabuttonchangesthereceptionfrequencyinstepsof50kHz.
Automatic station search run
• PushoneoftheTUNING(12)buttonsandkeepitpusheduntilthestationscanstarts.
Alternatively, you may also push the ENTER (11) button to start the scan.
• IfaFMtransmitterwithsucientlystrongsignalisfound,thescanstopsandthetransmitteris
played back.
Please set weaker stations by manual station selection.
Usethemenu"Scansetting"tosetiftheautomaticstationscanistondonlystrongsta-
tions("Strongstationsonly")orallstations("Allstations").Thesetting"Allstations"maylead
tothestationscanstoppingaftereveryfrequencystopinsomebroadcastingareas.Inthis
case,setthesearchsettingto"Strongstationsonly".
Station storage
The device may store up to 10 FM stations on the station button (2, 4, 6, 8 and 10).
The stored stations are not deleted even in case of power outage.
• SelectotherFMstationstobesavedasdescribedabove.
• Push and hold the desired station button (2, 4, 6, 8 or 10) until the display (13) shows
"Presetxxstored".
• Toselectthesecondlevel(6-10)ofthestationbuttons,rstpushthebuttonSHIFT(7)andpushand
hold the desired station button (2, 4, 6, 8 or 10) afterwards.
Selection of the stored stations
• Pushthedesiredstationbutton(2,4,6,8or10)tocallthesavedstation.
• Toselectthesecondlevel(6-10)ofthestationbuttons,rstpushthebuttonSHIFT(7)andpushthe
desired station button (2, 4, 6, 8 or 10) afterwards.
If no station is saved on the selected station button, the display (13) will show
"Presetempty".