Operation Manual

32

13:44
ABSOLUTE
DAB
Operation
Initial Commissioning
• After connection to the power supply, WELCOME will be displayed briefly before the display
switches to 0:00 (12).
• If a DAB-station can be received, the time will automatically adjust after a brief time.

If the time has not set itself automatically after approx. 2 minutes, the DAB
reception at the current setup location is insufficient. In this case, try to change
the direction of the antenna or select a different setup location.
• Push the button
/ Select (2) to switch on the device.
• The display shows SCANNING. The device scans for received DAB stations. The arrows in
the display show how far station search has progressed.
• If stations are found, the first station found is played back.
• If no stations are found, the display shows OFF AIR. In this case, place the device in another
location or try aligning the aerial (6) differently. The signal strength icon in the display shows
whether there is any DAB signal and how strong it is.
• To switch off the device again, keep the button
/ Select (2) pushed until the device switches
off.
• The last station set is received again when the deceive is switched on again.