User manual
Declaration of conformity (DOC)
Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau hereby declares that this
product conforms to the 2014/53/EU directive.
Click on the following link to read the full text of the EU declaration of conformity:
www.conrad.com/downloads
Select a language by clicking on a ag symbol, and then enter the product order
number in the search box. The EU declaration of conformity is available for
download in PDF format.
Disposal
Electronic devices are recyclable waste and must not be disposed of in household
waste. Always dispose of the product according to the relevant statutory regulations.
You thus full your statutory obligations and contribute to the protection of the environment.
Technical data
Output voltage/current ........................max. 5 V/DC, 2.1 A (total)
Charges ..............................................Android devices and iPhones
Input voltage .......................................12 V/DC
Voltage range .....................................10 - 26 V/DC
Standby power consumption .............. <1 W
Signal-to-noise ratio ............................> 60 dB
Distortion ............................................< 0.1 %
Frequency range ................................20 Hz - 15 kHz
Resolution (left/right channel) .............60 dB
Transmission frequency...................... 87.6 - 107.9 MHz
Transmission mode ............................phase-locked loop/stereo (PLL)
Transfer Rate .....................................512 Bit
Audio input ..........................................3.5 mm jack
Supported codecs ...............................WAV, MP3
Supports ............................................. SDHC & SDXC cards (microSD cards up to 32 GB)
Storage/operating conditions .............. 0 to +50 ºC, 10 - 90 %
relative humidity (non-condensing)
Dimensions (W x H x D) ..................... 52 x 47 x 78 mm
Weight ................................................45 g
Important information
FM-19 transmitter
Item no. 1526756
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads or scan the QR code
on this page. Follow the instructions on the website.
Safety information
Read the operating instructions and safety information carefully. If you do
not follow the safety instructions and information on proper handling in this
manual, we assume no liability for any resulting personal injury or damage to
property. Such cases will invalidate the warranty/guarantee.
a) General information
• This product is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly, otherwise it may become
dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, ammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, stop using it and prevent
unauthorized use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stress.
• Always handle the product carefully. Jolts, impacts or a fall even from a low height
may damage the product.
• Always observe the safety and operating instructions of any other devices which
are connected to the product.
• Consult a technician if you are not sure how to use or connect the product.
• Maintenance, modications and repairs must be done by a technician or an
authorized repair centre.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
b) Persons and product
• Never use the product immediately after it has been brought from a cold room
into a warm one. The condensation generated could destroy the product. Allow
the product to reach room temperature before connecting it to an appliance. This
may take several hours.
• Never pour any liquids over electrical devices or place objects lled with liquid next
to the product. If liquid or an object does enter the device, disconnect it from the
power supply immediately.
• Do not apply force when connecting the USB plugs. A USB plug can only be
inserted into a USB port in one orientation.
• Do not cover the housing, as the device may warm up during use. Always ensure
that there is sufcient ventilation.
• Do not drill any holes into the product housing.
• Only use the product inside vehicles.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microlming, or capture in electronic
data processing systems requires prior written approval from the editor. Reprinting, also in part, is prohibited. This
publication represents the technical status at the time of printing.
Copyright 2017 by Conrad Electronic SE. *1526756_v1_0417_02_DS_HintSheet_4L_(1)