Operation Manual

10. Functional Descriptions

 ThefollowingexamplesassumethatthePINis„1513“.

 Theaction„TEST“ALWAYScontainsansweringwiththecorrectparametersforthefunctionandthusisnot

indicated. Several functions share one answer text message to use the maximum of a text message.

 Theaction„RESET“isALWAYSresettingofafunctiontothefactorysettings(allparameters).Deviations

are indicated separately below.

a) Determining „STATUS“

Thecommand„STATUS“returnsasummaryofthemostimportantsettingsandconditionsoftheGX111.

TEST STATUS #1513

ThentheGX111sendsananswertextmessage.

Example(therightcolumnshowsonlyadescription;itisnotcontainedinthetextmessage):

 GX11101.XX NameoftheGX111,rmwareversion

GSM: 59% GSM signal strength

GPS: on GPS receiver is on

 TEMP:28CCurrentlymeasuredtemperature

Accu: 75% Current charge condition of the rechargeable battery

Slope: 0 degree Measured position angle 0° or no reference angle set

Diagnose: off Diagnosis mode off

Alarm: Disabled Alarm treatment via text message deactivated