User manual

10. Functional Descriptions

The following examples assume that the PIN is „1513“.

The action „TEST“ ALWAYS contains answering with the correct parameters for the function and

thus is not indicated. Several functions share one answer text message to use the maximum of a

text message.

The action „RESET“ is ALWAYS resetting of a function to the factory settings (all parameters).

Deviations are indicated separately below.

a) Determining „STATUS“

The command „STATUS“ returns a summary of the most important settings and conditions of the GX111.

TEST STATUS #1513

Then the GX111 sends an answer text message.

Example(therightcolumnshowsonlyadescription;itisnotcontainedinthetextmessage):

GX111 01.XX Name of the GX111, ﬁrmware version

GSM: 59% GSM signal strength

GPS: on GPS receiver is on

TEMP: 28 C Currently measured temperature

Accu: 75% Current charge condition of the rechargeable battery

Slope: 0 degree Measured position angle 0° or no reference angle set

Diagnose: o Diagnosis mode o

Alarm: Disabled Alarm treatment via text message deactivated