User manual

3. Setting the Language (Function „LANGUAGE“)

The GX111 sends alarm text messages in the German language. If the text messages are to be sent in the

English language, send the following text message command to the GX111:

SET LANGUAGE EN #1513

To receive the text message in German again, send the following text message command to the GX111:

SET LANGUAGE DE #1513

4. Administration of the Phone Book (Functions „TEL“, „TEL1“,…)

The GX111 can save up to 4 phone numbers. In case of alarm, a notiﬁcation text message is sent to each of

these phone numbers. These phone numbers can also use the function „INCALL“.

If the same number is in the list several times, it will receive the same text message as many

times.

The GX111 may process phone numbers in national and international format. However, the inter-

national format should be used at all times, since use abroad may cause problems otherwise.

 Example:0172/xxxxxxxx(national)becomes+49172xxxxxxxx(international)

Saving Phone Numbers

Use the following command to save a phone number in the GX111:

SET TEL1 +49111… #1513

SET TEL2 +49222… #1513

SET TEL3 +49333… #1513

SET TEL4 +49444… #1513

There is the option of programming several phone numbers in a single command, e.g. 3 phone numbers

(TEL1 to TEL3):

SET TEL1 +49111… +49222… + 49333… #1513

Concurrent programming of phone numbers is possible with a list starting from the indicated phone book

entry and ending at the last phone book entry as follows:

SET TEL1 <tel-nr1> <tel-nr2> <tel-nr3> <tel-nr4> #1513

SET TEL2 <tel-nr2> <tel-nr3> <tel-nr4> #1513

SET TEL3 <tel-nr3> <tel-nr4> #1513

SET TEL4 <tel-nr4> #1513