Instructions

Wiring example: Garage gate drive

1 Control module

2 External voltage/current supply (24 VDC)

3 Aerial Module

4 For impulse input of the garage gate drive

Observe proper connection of the connection lines (according to the description

of the garage gate drive) and whether the button as shown in the example

actually must be scanned to GND. Set the switching time of the relay to 0.5 s

so that you can switch the garage gate movement between „up“ and „down“

quickly.

In the above wiring example, it is assumed that the garage gate drive works with

an operating voltage of 24 VDC. If this is not the case (see operating instructions

on the garage gate drive), you may need to use an additional mains unit for the

control module and a dierent wiring of the relay.

+12 V

GND

+24 V

Rel 1

Rel 2

Ant 1

Ant 2

GND

+24 V