User manual

Programming Quick Guide
LS6320E.
Installation
Make sure that the scanner has the correct cable to
plug in the PC as below described:
1. USB cable Connection
(Please use correct cable for the interface)
Reset Configuration to Defaults
If you are unsure of the scanner configuration or
have scanned the incorrect codes, please scan the
below “Default” barcode. This will reset the scanner
to its factory defaults.
Default
2.Auto-sensing setup
The auto-sensing features works when putting
scanner on stand. When scanner removes from
stand, scanner will become trigger mode.
Indicator Information
Red LED ON Not read
Green LED Good read
SINGLE SCAN
SINGLE SCAN NO
TRIGGER
READING
MODE
LASER TIMEOUT
–5 SECONDS
LASER TIMEOUT
–2 SECONDS
If you want expand laser timeout, please scan “Single Scan No
Trigger + Laser Timeout- 5 seconds or Laser Timeout- 2 second".
CODE 11 DOUBLE
CHECK - ENABLE
CODE 11 DOUBLE
CHECK - DISABLE
DOUBLE
CHECK
CODE 39 DOUBLE
CHECK ENABLE
CODE 39 DOUBLE
CHECK DISABLE
CODE 93 DOUBLE
CHECK - ENABLE
CODE 93 DOUBLE
CHECK - DISABLE
CODE 128 DOUBLE
CHECK - ENABLE
CODE 128 DOUBLE
CHECK - DISABLE
CODABAR DOUBLE
CHECK - ENABLE
CODABAR DOUBLE
CHECK - DISABLE
If DOUBLE CHECK function is enabled, scanner reads barcode twice with
automatic comparison. In case of a matching result, barcode will be
transferred to the computer.
I2OF5 DOUBLE
CHECK - ENABLE
I2OF5 DOUBLE
CHECK - DISABLE
DOUBLE
CHECK
ID2OF5 DOUBLE
CHECK - ENABLE
ID2OF5 DOUBLE
CHECK - DISABLE
MSI DOUBLE
CHECK - ENABLE
MSI DOUBLE CHECK
- DISABLE
UPC/EAN DOUBLE
CHECK ENABLE
UPC/EAN DOUBLE
CHECK DISABLE
REVERSE IMAGE
– ENABLE
IMAGE
REVERSE IMANGE
- DISABLE
In order to read the special barcode in reverse color. (black to
white and white to black)
SEND BAR CODE
ID - DISABLE
CODE ID
SEND BAR CODE
ID – AS A PREFIX
SEND BAR CODE
ID - RESET
SEND BAR CODE ID –
AS A SUFFIX
to check the symbology of barcode you scan (g means Code 128;
e means EAN 13)