User manual

24
10. Inserting Note Holder
The enclosed note holder can be plugged in at the rear of the keyboard if necessary.
It is only suitable for sheet music or manuscript books, but not for heavy books, etc.
11. Connection of Headphones
You can connect conventional headphones to the 3.5 mm stereo jack socket „OUT“ (21) on the rear of the
keyboard.
Playback via the installed speakers is switched o automatically.
Proceed as follows for connection:
• Reducethevolumeatthekeyboardasfaraspossible.
• Connecttheheadphonestothe3.5mmstereojacksocket„OUT“(21).
• Setalowvolumeatthekeyboardandcheckite.g.byplayingonthekeyboard;carefullyputonthehead-
phones. Now adjust the volume as you like.
Important!
If the volume is too high, there is the danger of hearing damage. Therefore, set the volume so that
it feels comfortable and is not too loud!
12. Connection of an External Amplifier
You can connect an external amplifier to the 3.5 mm stereo jack socket „OUT“ (21) on the rear of the key-
board.
Playback via the installed speakers is switched o automatically.
Proceed as follows for connection:
• Reducethevolumeatthekeyboardasfaraspossible.Thesameappliestotheamplier.
• Connectthe3.5mmstereojacksocket„OUT“(21)totheamplier.Alwayschooseananalogueinputwith
line level for this, e.g. the TAPE or AUX input.
• Setalowvolumeatthekeyboardandtheamplierandcheckit,e.g.byplayingonthekeyboard.Now
adjust the volume as you like.
Important!
If the volume is too high, there is the danger of hearing damage. Therefore, set the volume so that
it feels comfortable and is not too loud!