Renkforce PL500D duo
While the information in this manual has been compiled with great care, it may not be deemed an assurance of product characteristics. The manufacturer shall be liable only to the degree specified in the terms of sale and delivery. The reproduction and distribution of the documentation and software supplied with this product and the use of its contents is subject to written authorization from the manufacturer. We reserve the right to make any alterations that arise as the result of technical development.
Contents 1 About this manual ....................................................................................................... 4 1.1 Intended use ...........................................................................................................4 1.2 CE conformity ..........................................................................................................4 1.3 Safety notes ............................................................................................................
About this manual 1 About this manual Carefully read all instructions before setting up the device and store the manual and/or installation guide for later reference. After a brief introduction to "PLC" basics and a presentation of the PL500D duo in Chapter 2, Chapter 3 will cover successfully setting up your PL500D duo. Chapter 4 explains how to configure your PLC network.
About this manual 5 out of the power outlet. Then contact qualified specialist personnel (aftersales service) exclusively. Damage is deemed to have occurred, for example, •if the power cable or plug is damaged •if the device has been showered with liquid (e.g. rain or water). •if the device is inoperable. •if the housing of the device is damaged. Devices may only be operated using a mains power supply, as described on the nameplate.
Introduction 2 Introduction This chapter gives an overview of Powerline and briefly introduces the adapter. Practical examples are listed at the end of the chapter. 2.1 What does Inhouse Powerline stand for? “Inhouse Powerline” (PLC, HomePlug) is an intelligent, secure technology that lets you set up a home network easily, quickly and economically via your electrical wiring, without the need for complex and expensive dedicated cabling.
Introduction 7 2.
Installation 3 Installation This chapter describes the connection and display elements of the adapter and how to connect it. 3.1 System requirements • Operating systems: Windows Vista Home Premium (32 bit/64 bit), • Windows 7 (32 bit/64 bit), Windows 8 (32 bit/64 bit), Windows 8 Pro (32 bit/ 64 bit) or any other operating system with network support • Network connection Please note that your computer or other device must feature a network adapter with an Ethernet port. 3.
Installation 9 Please note that all adapters which are connected to the electrical wiring, switch to energy-saving mode after approx. 11 minutes, if no active network device is connected to the Ethernet port. In energy-saving mode, the adapter cannot be accessed via the electrical wiring. 3.3 Connecting the adapter Use the included network cable to connect the adapter to the network port of your running computer. Plug the adapter into a free electrical outlet.
Configuring the PLC network 4 Configuring the PLC network To set up custom encryption for your network—either using the PLC button or the Configuration Wizard. 4.1 Encrypting the PLC network at the touch of a button To encrypt a PLC network simply press the PLC button that is located on the device. Pressing this button will encrypt your network with a randomly generated password. Adapters cannot be configured while in Standby mode.
Configuring the PLC network 11 Expanding an existing PLC network with a new adapter If you have already secured your existing PLC network using the PLC button, use the same method to integrate other adapters. Once you have successfully connected the new adapter, first press the PLC button of one of your network’s existing adapters (one second), then press the PLC button of your new adapter (one second) within two minutes. That's it! The new adapter is now integrated in your network.
Configuring the PLC network 4.2 Encrypting the PLC network via the configuration software To install the software, insert the included CD-ROM in the CD drive of your computer. If autoplay is installed on your computer, the installation will start automatically. Otherwise, open the folder with the Windows Explorer by rightclicking on Start (or the Windows logo) and selecting Explorer from the context menu. Double-click to start the installation wizard manually.
Appendix 13 5 Appendix 5.1 Bandwidth optimization • Plug the device directly into a wall socket. Avoid multiple sockets. This may impair the transmission of the PLC signals. • Plug the devices into different outlets and avoid using the same extension strip. 5.2 Disposal of old devices The icon with crossed-out wastebasket on the device means that this adapter is an electrical or electronic device that falls within the scope of application of the German Electrical and Electronic Equipment Act.
Appendix 5.3 Warranty conditions The warranty is given to purchasers of the manufacturer's products in addition to the warranty conditions provided by law and in accordance with the following conditions: 1 Warranty coverage a) The warranty covers the equipment delivered and all its parts.
Appendix 15 e) f) g) if the device was opened, repaired or modified by persons not contracted by the manufacturer, if the device shows any kind of mechanical damage, or if the warranty claim has not been reported in accordance with 3a) or 3b). 5 Operating mistakes If it becomes apparent that the reported malfunction of the device has been caused by unsuitable hardware, software, installation or operation, the manufacturer reserves the right to charge the purchaser for the resulting testing costs.