Instructions

26
13. Troubleshooting
By purchasing this device, you have acquired a product designed to the state of the art and operationally reliable. Nev-
ertheless, problems or errors may occur. Therefore, we would like to describe how to eliminate possible errors here:
Always observe the safety information!
No function after the device has been switched on:
• The mains plug is not plugged into the socket correctly.
• The mains socket is not supplied with current.
• Thefusetriggered.Replaceit(see“FuseReplacement”).Shouldthefusetriggeragain,havethedevicerepaired
in a specialised workshop.
There suddenly is no fog in operation anymore
• The device performs subsequent heating. Once the reheating process is complete, the device will emit fog again.
• The device no longer is connected to the voltage supply. Check for correct connection and voltage supply to the
mains socket.
• The tank is empty. Let the device cool off and top up the tank again.
The device produces fog for a short time after deactivation/disconnection
• It is not a defect. The remaining fog liquid in the still-hot fog exit opening evaporates.
Repairs other than those described above must only be carried out by an authorised specialist.
14. Disposal
Electronic devices are recyclable waste and must not be disposed of in the household waste!
Dispose of the product according to the applicable statutory provisions at the end of its service life.