EZCast Pro User’s Manual Rev. 1.
General “EZCast Pro” is a new product based on successful wireless app EZCast, and adds some new features for commercial/educational application. It supports Multi-users Display under our new Host Control System and Content Broadcasting function.
App (iOS/Android) l iOS System requirements iOS Device Resolution support Storage iOS 7 and above All iPhone model after iPhone 4 All iPad model after iPad 2 All iPod touch after iPod touch 4th generation l iPhone: 480x320~1136x640 l iPad: 1024x768~2048x1536 At least 40MB free space needed l Android OS System requirements Phone/Pad Resolution Storage Android 4.0 ICS model with 1GB RAM WVGA ~1080p At least 40MB free space needed l Start up 1.
l Device Connection 1. Before you start the app, please connect your iOS device’s WiFi with EZCast Pro SSID (ex: EZCastPro_xxxxxxxx) 2. Once you’ve connected to EZCastPro, the on-screen link status will be updated and show how many devices are linking to it directly. l App starts (below photos are based on iOS version) 1. When you execute the app, if you are not linking to EZCast Pro, you can only use several functions in offline mode. 2.
*Note: After setting up your internet, sometimes the connection between EZCast Pro and your mobile phone might be disconnected because of different WiFi router channel. Please remember to reconnect again. 4. There is another link mode, Infrastructure mode, which allows you to link with EZCast Pro through router. However, the performance may not as good as direct link, and you will need to enter the setting to enable it if need it.
l App Features Photo Viewer u You will have to allow EZCast Pro to share your camera roll and enable the location service before using Photo function.
u In Photo viewer, you can select photo and it will be displayed on your TV. You can also use gesture control to zoom in/out or change photos. u We developed a practical tool called “Sketch” , you can draw on the photo you picked, and save it if you like. Document Viewer u The document viewer can support MS-office, PDF, and Apple’s iWorks. Before you start to cast, please remember to sync the document files to your iOS device through iTunes.
Live Camera u Live camera is a real object camera which allows you to stream the image from mobile device’s camera, and take a snap shot to edit. u You can adjust image quality, switch from Front/Rear camera. You can enable Sketch and save the current image to album. Video Player u There are 2 sources to video streaming.
Music Player u The music player allows you to stream music through WiFi, and we can support playlist. u There are multiple music formats supporte: ape, flac, ogg, mp3, wma, wav, rm, m4a, aac, ra, aif, aiff, mka * Please be noted EZCast Pro can’t access your iTunes music library due to iOS limitation, so you must use iTunes to sync the audio you like to our app. Web Browser u EZCast Pro comes with a built-in browser, and we also categorize several popular websites for you.
shown for you to download and display. u You can enable sketch function if you download and decode a document file. *iOS version doesn’t support Google Drive yet. Live TV u We categorized different internet TV sites for you, so that you can easily select the TV list and watch the program instantly. u The list may vary with different country setting.
the best way to drive us better. Update u Update function allows you to check the app version, history and update it up to date. Setting u In setting function, you can setup EZCast Receiver’s configurations including output resolution, change SSID password, setup router connection for internet surfing, boot up mode priority and update the latest FW over the air.
n DLNA DMR u DLNA is an industrial standard which allows you to stream multimedia formats through WiFi/LAN u In the main menu, you can also use DMLA app to push multimedia files to EZCast Pro for streaming. n Preferred Device u We added a special mode “Preferred device” which will remember your device ID. You can save the current hardware to preferred device, and the app will find the preferred device and link to it directly next time.
n Host control u When you are the first user link to EZCast Pro and open the app, you will become the “Host”. u Host has the authority to control the display, that means Host role can use all features without limitation u The next or later coming users will be treated as “Guest”, some functions will be disabled under Guest mode, and you will need to get Host’s permission to display.
* Once the current host quits from app, the second user will become host automatically. AirView u You can enable AirView function to see the current display content on EZCast Pro hardware, this is a great tool for display sharing. u This function will not need Host’s permission to enable. * This feature doesn’t support video or audio streaming.
Split Screen u EZCast Pro device will allow max. 4 users to display on screen together, but only Host can decide the position he wants, other guest’s screens will be placed automatically after the request is allowed.
EZMirror (Only for Windows and Android) u EZMirror is fully compatible with Miracast, you can click the EZMirror button in EZCast app, and the receiver will be switched to Miracast mode. u Once you turn it on, there will be a 60seconds countdown for your mobile phone to connect with the receiver. Please select your Miracast function in your mobile phone setting page. u We also recommend you link your smart phone to your home network at the same time to keep internet connection.