Instructions

52
Connect by entering the network key (if there is no WPS function on the WLAN router)
• Onthenextscreen,select“AddAP(Scan)”andconrmagainasdescribedabove.
• The radio device will now look for all available wireless routers nearby and lists them.
• SelectthedesiredWLANrouterandconrmtheentry.
• Enter the network key of your wireless router. Use either the 10-key (18) on the remote control or turn the Rotary
knob (5) to select the required digits and characters.
Entering characters with the remote control's 10-keyboard
Button Character Button Character
1 1, different special characters (see display) 6 6, M, N, O, m, n, o
2 2, A, B, C, a, b, c 7 7, P, Q, R, S, p, q, r, s
3 3, D, E, F, d, e, f 8 8, T, U, V, t, u, v
4 4, G, H, I, g, h, i 9 9, W, X, Y, Z, w, x, y, z
5 5, J, K, L, j, k, l 0 0, DEL
Pushing the numbers 0, 1, 2, etc., e.g. when entering a password, shows the numbers and letters
(alphanumeric characters) as shown above. Every time the button is pushed, the display jumps forward by
one number or letter.
 Ifyoupush,e.g.,button(5),thenumber"5"isdisplayedrst.Ifyoupushthebuttonagain,thecapitalletter
"J" is displayed, etc.
• When the desired character appears, press the
button (3) or the corresponding arrow button (20) on the remote
control to enter the next character.
• Press the
button (2) or the corresponding arrow button (20) on the remote control to delete the last character
entered.
The password is case-sensitive.
• When all characters have been entered, conrm the network button by pressing the rotary knob (5) or the
OK button (29) on the remote control. The connection is established and the radio switches to the main menu.
• The reception quality is shown in the upper left corner of the display (6). The more bars appear, the better the
connection to the network.