User manual

ManualsBrandsRENKFORCE ManualsNetwork ComponentsNetwork adapter 1 Gbit/s USB-C™ USB 3.1, LAN (10/100/

Product overview

1 Orange LED 2 Green LED

3 RJ45 connection 4 Housing

5 USB 3.1 port (Type C™)

Setup

a) Connection

• To install the requisite drivers, connect the USB network adapter to a USB 3.1 port (Type-C™)

on a computer. The port must be able to supply a current of 200 mA.

• Connect the RJ45 port (3) on the USB network adapter to your switch or router using a 1:1

connected network cable.

b) Driver installation

• Windows 8.x or higher, MAC OS 10.10 or higher and Linux Kernel 4.10.x or higher include

the necessary drivers.

• If you are using Windows 7 or Vista/XP (32-/64-bit), you will need to install the drivers yourself.

- Start Windows and connect the USB network adapter to a computer with a USB Type C™

port.

- Windows will automatically detect the USB network adapter and display it as a CD-ROM

drive.

- Double click the CD ROM drive icon. Follow the instructions to install the drivers.

- To download the latest drivers, visit: http://www.drivers-download.com

Enter "DL-0265101" to search for the latest available drivers for the USB network

adapter.

• After completing the update, you may need to restart your operating system to ensure that

the USB network adapter functions correctly.

• Your connected computer now has a network connection via the USB 3.1 port (Type C™).

c) LED indicator

• The USB network adapter features a number of LED indicators that indicate the following:

- Green LED (2) on: Connected and active

- Orange LED (1) on: Data transfer rates up to 1000 Mbit/s

- Green LED (2) off: No network connection

Tips and useful information

• Only connect the USB network adapter to a USB 3.1 port (Type C™) on a computer. USB

ports with a lower specication are too slow.

• If there is a network or system administrator who is responsible for your network (e.g. in a

large company), ask them to set up the connection and install the drivers. Do not attempt to

connect the USB network adapter by yourself.

• In practice, the stated maximum data transmission rate of 10/100/1000 MBit cannot be

reached. This is due to the transmission method used, transmission errors and other devices

on the network.

• If you are using Windows, it may take some time for a PC to appear on the network. When

you switch the computers on and Windows is loaded on all computers after a few seconds,

you cannot usually access another PC immediately.

• After a few minutes, if it is still not possible to access other PCs, check any the settings of any

rewalls and/or virus scanners.

• Access permissions must also be set accordingly, if you are using an operating system that

offers such features.

• Consult the applicable operating instructions when using a network printer or other devices

on the network.

• There are numerous reasons as to why a network connection may fail.

• Please refer to the appropriate specialist literature or consult a specialist technician.

- If you are not using a DHCP Server (e.g. integrated into all DSL routers), you should assign

a xed IP address to each device on the network.

- For example, set the router to 192.168.1.1, set the rst computer to 192.168.1.2, the

second computer to 192.168.1.3, and so on.

- The rst three digits must be the same on all computers; the last digit can range from 1

to 254.

- The “subnet mask” must be set to 255.255.255.0 for all computers on the network.

- Please keep in mind that an IP address (such as 192.168.1.1) can only be used once on the

network. If you set your router IP address to 192.168.1.1, no other device on the network

can use this IP address!

Operating instructions

USB C Gigabit network adapter

Item no. 1693025

Intended use

This product is designed to be connected to a USB 3.1 port (Type C™) on a computer and

provides a network port with 10/100/1000 MBit speeds via a cable with an RJ45 connection.

The USB network adapter automatically detects the maximum speed (auto-sensing) and uses

the highest possible speed. For more information on the supported protocols and functions,

refer to the “Technical data” section.

This product is intended for indoor use only. Do not use it outdoors. Contact with moisture (e.g.

in bathrooms) must be avoided under all circumstances.

For safety and approval purposes, you must not rebuild and/or modify this product. Using the

product for purposes other than those described above may damage the product. In addition,

improper use can cause hazards such as a short circuit or re. Read the instructions carefully

and store them in a safe place. Only make this product available to third parties together with

its operating instructions.

This product complies with statutory, national and European regulations. All company and

Package contents

• USB network adapter

• Operating instructions

Up-to-date operating instructions

Download the latest operating instructions at www.conrad.com/downloads or scan the QR code

shown. Follow the instructions on the website.

Explanation of symbols

The symbol with an exclamation mark in a triangle is used to highlight important

information in these operating instructions. Always read this information carefully.

The arrow symbol indicates special information and advice on how to use the

product.

Safety information

Read the operating instructions and safety information carefully. If you do

not follow the safety information and information on proper handling in these

operating instructions, we will assume no liability for any resulting personal

injury or damage to property. Such cases will invalidate the warranty/

guarantee.

a) General information

• The device is not a toy. Keep it out of the reach of children and pets.

• Do not leave packaging material lying around carelessly, as it may become a

dangerous toy for children.

• Protect the product from extreme temperatures, direct sunlight, strong jolts, high

humidity, moisture, ammable gases, vapours and solvents.

• Do not place the product under any mechanical stress.

• If it is no longer possible to operate the product safely, take it out of operation and

protect it from any accidental use. Safe operation can no longer be guaranteed

if the product:

- is visibly damaged,

- is no longer working properly,

- has been stored for extended periods in poor ambient conditions or

- has been subjected to any serious transport-related stresses.

• Please handle the product carefully. Jolts, impacts or a fall even from a low height

may damage the product.

• Always observe the safety information and operating instructions of any other

devices which are connected to the product.

• Consult a technician if you are not sure how to use or connect the product, or if

you have concerns about safety.

• Maintenance, modications and repairs must be done by a technician or a

specialist repair centre.

• If you have questions which remain unanswered by these operating instructions,

contact our technical support service or other technical personnel.

b) Persons and product

• Do not cover the USB network adapter. Always ensure that there is sufcient

ventilation around the USB network adapter. It may heat up during use.

Summary of content (6 pages)

PAGE 1
Product overview 3 Operating instructions USB C Gigabit network adapter 4 5 2 Item no. 1693025 1 Intended use 1 Orange LED 2 Green LED 3 RJ45 connection 4 Housing This product is designed to be connected to a USB 3.1 port (Type C™) on a computer and provides a network port with 10/100/1000 MBit speeds via a cable with an RJ45 connection. The USB network adapter automatically detects the maximum speed (auto-sensing) and uses the highest possible speed.
PAGE 2
Care and cleaning • Always disconnect the product from the power supply before cleaning it. • Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these could damage the housing or stop the product from functioning properly. • Use a dry, lint-free cloth to clean the exterior of the product. Disposal Electronic devices are recyclable waste and must not be placed in household waste.
PAGE 3
• Si vous avez encore des questions auxquelles ce mode d'emploi n'a pas su répondre, nous vous prions de vous adresser à notre service technique ou à un expert. b) Personnes et produit • Ne couvrez pas l'adaptateur réseau USB. Veillez à ce que la ventilation de l'adaptateur réseau USB soit suffisante. Celui-ci peut s'échauffer au cours du fonctionnement.
PAGE 4
• Veuillez consulter la documentation technique correspondante ou demander à un spécialiste. -- Dans le cas où vous n’utilisez pas votre propre serveur DHCP (par exemple intégré dans tous les routeurs DSL), vous devrez alors attribuer à chaque périphérique du réseau sa propre adresse IP. -- Configurez par exemple le routeur sur 192.168.1.1, le premier ordinateur sur 192.168.1.2, le deuxième ordinateur sur 192.168.1.3 et ainsi de suite.
PAGE 5
• Laat onderhoud, aanpassingen en reparaties alleen uitvoeren door een vakman of in een daartoe bevoegde werkplaats. • Als u nog vragen heeft die niet door deze gebruiksaanwijzing zijn beantwoord, neem dan contact op met onze technische dienst of andere technisch specialisten. b) Personen en product Gebruiksaanwijzing • Dek de USB-netwerkadapter niet af. Let erop dat de USB-netwerkadapter voldoende wordt geventileerd. Deze kan bij gebruik warm worden. USB C Gigabit-netwerkadapter Bestelnr.
PAGE 6
• Raadpleeg de relevante vakliteratuur of leg uw vraag voor aan een deskundige. -- Wanneer u geen eigen DHCP-server gebruikt (bijv. in alle DSL-routers geïntegreerd), dient u iedere computer in het netwerk een eigen vast IP-adres toe te kennen. -- Stel de router bijvoorbeeld in op 192.168.1.1, de eerste computer op 192.168.1.2, de tweede computer op 192.168.1.3, enz. -- De eerste drie cijfers moeten op alle computers hetzelfde zijn. De laatste cijfers kunnen tussen 1 en 254 liggen.