Instructions

29
10. Commissioning
Step 1: Set the micro SIM card to PIN 1513.
 TheGX111assumesaSIMcardwiththePIN1513initsbasicsettings.ThePIN
therefore must be changed on a dierent mobile phone before inserting it into
theGX111.
Step2:InserttheMicro-SIMcard(withPIN1513)intotheGX111.Observeautomatic
latching of the SIM card insert.
Step3:TheGX111shouldstartautomaticallyaftertheMicroSIMcardisinserted.This
canbetoldbythe„ERR“LEDashingoncepersecond(booting).
 IfnoLEDislit:
 • ChecktheSIMcardlatchinginthecardinsert.
 • Pushthebutton„RESET“.
 • Therechargeablebatterymaybeat.ConnecttheGX111toaUSBport(e.g.
theUSBportofacomputer).Theyellow„AKKU“LEDshouldbelitnow.Let
the rechargeable battery charge for at least 15 minutes.
 • Therechargeablebatteryplugmayhavecomeloose.ObserveChapter9.
 TheredLEDlightislitpermanently.
 • ASIMerrorhasbeenrecognised.EitherthePINiswrong,theSIMcardis
locked(PUK)ornotactivated.ChecktheSIMcardwithadierentmobile
phone.
 • A hardware error has been found (rare). Visit the download area at
www.conrad.com. There may be diagnosis software available there.
Step4:Ifthegreen„GSM“LEDashesquickly(1s),thedeviceistryingtondtheGSM
network.Ifthe„GSM“LEDashesslowly(onceevery3s),theSIMcardhasbeenbooked
intotheGSMnetwork.TheGX111isnowreadyforoperation.
 Ifthe„GSM“LEDashesquicklypermanently
 • NoGSM-reception.
 • TheSIMcardmaynothavebeenactivated.Pleasecheckitwithamobile
phone.