G-PORTER Portable GPS Tracker GP-102 User’s Manual Canmore Corporation www.canmore.com.
Chapter 1 GP-102 Overview The GP-102 is the best available portable GPS tracker and sports analyzer with the most functions with the simplest operations. The SiRFstarIV™ navigation processor is equipped to deliver the best positioning quality. The GP-102 sports tracker provides a wide variety of sports modes to support analysis with different software analyzers. The GP-102 allows users to retrieve previous tracks. The GP-102 provides route planning or sports tracking functions.
Function Tree Diagram of GP-102 Using the GP-102 for the first time, press and hold the right key to turn the GP-102 on and the following screen will appear: GPS clock synchronization: Place the GP-102 in open sky. Set time: Press and hold the LEFT key for 2-3 seconds to call out. Press and hold the RIGHT key for 2-3 seconds to enter.
Chapter 2 Sports Mode and Tracker (Options: Press and hold the right key for 2-3 seconds to enter the following pages) Press and hold the right key for 2-3 seconds to enter the Sports Mode. Sports and Travel Options The following examples are based on the jogging mode . Press and hold the right key for 2-3 seconds to enter the jogging mode : █ Data 1 : Jogging Mode. GPS Signal Meter. Charging As shown on the left screen, Distance is 320m, Average Speed is 4.
Select Stop Log and press and hold the right for 2-3 seconds to enter Stop Log setup. Jogging Mode off Switch screen to GPS off █ Data 2 : Press the right key once to switch screen. As shown on the left screen, Speed is 0 km/h, Average Speed is 8km/h and Maximum Speed is 9.2 km/h. Select Save as POI. (Press and hold the right key for 2-3 seconds to enter POI setup) Select Save as POI and press and hold the right key for 2-3 seconds to enter POI setup.
Select Stop Log and press and hold the right key for 2-3 seconds to enter Stop Log setup Jogging Mode off Switch screen to GPS off █ Data 3 : Press the right key once to switch screen As shown on the left screen, Pace is hours/km, Average Pace is 7.5 hours/km and Minimum Pace is 6.5 hours/km. Select Save as POI. (Press and hold the right key for 2-3 seconds to enter POI setup) Select Save as POI and press and hold the right key for 2-3 seconds to enter POI setup.
Select Stop Log and press and hold the right key for 2-3 seconds to enter Stop Log setup. Jogging Mode off Switch screen to GPS off █ Data 4: Press the right key once to switch screens As shown on the left screen, Altitude is 60.3m, Total Ascend is 8.4 and Gradient is 0%. Select Save as POI. (Press and hold the right key for 2-3 seconds to enter POI setup) Select Save as POI and press and hold the right key for 2-3 seconds to enter POI setup.
Select Stop Log and press and hold the right key for 2-3 seconds to enter Stop Log setup. Jogging Mode off Switch screen to GPS off █ Data 5 Press the right key once to switch screens As shown on the left screen, Calories consumed is 57.1, Steps are 25 and Temperature is 28°C. Select Save as POI. (Press and hold the right key for 2-3 seconds to enter POI setup) Select Save as POI and press and hold the right key for 2-3 seconds to enter POI setup.
Select Stop Log and press and hold the right key for 2-3 seconds to enter Stop Log setup. Jogging Mode off Switch screen to GPS off █ Data 6 : Press the right key once to switch screens. A POI has been selected. As shown on the left screen, the object is moving. Select Save as POI. (Press and hold the right key for 2-3 seconds to enter POI setup) Select Save as POI and press and hold the right key for 2-3 seconds to enter POI setup.
After selecting, press and hold the right key to return to the previous page. Select Map Scale and press and hold the right key for 2-3 seconds to enter Map Scale. After selecting, press and hold the right key to go to the previous page. █ Data 7 Press the right key once to switch screens. The GPS status is as shown on the left screen. Select Save as POI.
Select Stop Log and press and hold the right for 2-3 seconds to enter Stop Log setup. Jogging Mode off Switch screen to GPS off On the left screen below, press the right key once to return to the first screen as shown on the right. Users can retrieve the POI to CANWAY (software) for further analysis. Canmore Corporation www.canmore.com.
Chapter 3 Trip Planning (Select and press and hold the right key for 2-3 seconds to enter and set trip planning). 1. First, edit the required routes on the CanWay Planner. 2. Upload data to the GP-102 with the Sync function. Canmore Corporation www.canmore.com.
3. Route upload in progress. 4. Press and hold the right key to enter Trip Planning. Next, the route uploaded from the PC is shown on the screen as Test 1. 5. The GP-102 receives GPS signals in open sky. After your position is detected, press and hold the right key to enter route Test 1. 6. Press and hold the right key to call out Save as POI and Map Scale. Select Save as POI to save data as a POI. Select Map Scale to adjust map display scale. Canmore Corporation www.canmore.com.
7. Press and hold the right key to enter Map Scale and press the left and right keys to adjust the map scale. 8. After adjusting the map scale, the route planned in Test 1 will be displayed on the map. If a POI is set in the CanWay Planner, it will be displayed on the map at the same time. Press and hold the left key for 2-3 seconds to return to Home. Canmore Corporation www.canmore.com.
Chapter 4 Geotag Mode (Select and press and hold the right key for 2-3 seconds to enter setup as shown below.) Press and hold the right key for 2-3 seconds to enter POI setup. After setting a POI, turn the GPS on . : The POI set at 14:01 on April 11. Select New POI: Press and hold the right key for 2-3 seconds to enter POI setup Select POI type. Select : Press and hold the right key for 2-3 seconds. The direction, distance, and altitude of POI set at 15:45 on April 11 from the present location.
The new POI has been added to the GP-102. Press and hold the left key for 2-3 seconds to return to Home. Canmore Corporation www.canmore.com.
Chapter 5 Historical Data (Select and press and hold the right key for 2-3 to enter setup as shown below.) Press and hold the right key for 2-3 seconds to enter Historical Data Mode. Select and press and hold the right key for 2-3 seconds to enter the historical data mode. Data include Distance, Duration, Average Speed and Average Pace. Press the right key once to go to the next page. Data include Best Speed, Best Pace, Ascent and Steps. Press the right key once to go to the next page.
Please refer to the track on the left screen. Press and hold the right key for 2-3 seconds to enter the Follow Historical Data mode. Select Follow and press and hold the right key for 2-3 seconds to enter the Follow Historical Data mode Select Map Scale and press and hold the right key for 2-3 seconds to enter the Map Scale setup. When the Follow sign appears, follow the track as shown on the left screen to return to the origin. Press and hold the left key for 2-3 seconds to return to Home.
Chapter 6 Extra Function Mode (Select key to enter setup.) and press and hold the right When your compass appears on the screen, press and hold the right key for 2-3 seconds to calibrate the compass. Rotate the GP-102 as shown for 20 seconds. Press and hold the left key for 2-3 seconds to return to the previous page. Press the right key to display the following. The atmospheric pressure is shown on the Barometer. Press the right key for 2-3 seconds to calibrate the altimeter.
Press the right key to display the following: When the Pedometer appears, press and hold the right key for 2-3 seconds to calibrate the Pedometer. Clear steps in the pedometer. Press and hold the left key for 2-3 seconds to go to the previous page. Press the right key to display the following: Water Level. Canmore Corporation www.canmore.com.
Chapter 7 Setup (Select setup) and press and hold the right key to enter 1. Select Log to display the following: Select Log Rule and press and hold the right key. Select Log Rule: by Time and by Distance Select Delete All Log to clear all log data. Press and hold the left key for 2-3 seconds to go to the previous page. 2. Select Auto Pause to display the following: Off: Turn Auto Pause off. Stopped: Pause when speed is below 1.5kmh. Custom: Users can customize speed and related pause.
3. Select User Profile to display the following: Gender Birth Year Weight 4. Select Calibration (altimeter and compass) to display the following: Select Altimeter and press and hold the right key to display the following: Select Auto by GPS (reset altimeter automatically by GPS) Select Manual (reset altimeter manually) Select Compass and press and hold the right key to display the following: Rotate the GP-102 as shown for 20 seconds. Canmore Corporation www.canmore.com.
5. Select GPS (set GPS status) to display the following: Differential GPS: Turn Differential GPS on or off. Self-AGPS: Turn Self-AGPS on or off. Press and hold the left key for 2-3 seconds to go to the previous page. 6. Select System (set System status) to display the following: A. Select Display and press and hold the right key for 2-3 seconds to enter setup. Select Backlight press and hold the right key for 2-3 seconds to enter Backlight setup.
Press and hold the left key for 2-3 seconds to go to the previous page. C. Select Time and press and hold the right key for 2-3 seconds to enter setup. Select Format and press and hold the right key for 2-3 seconds to enter Time Format setup Select Daylight Saving and press and hold the right key for 2-3 seconds to enter Daylight Saving setup. Press and hold the left key for 2-3 seconds to go to the previous page. D. Select Units press and hold the right key for 2-3 seconds to enter setup.
Appendix The package includes the following items: GP-102 Software Disc/ User’s Manual USB Cable Precautions Keep the GPS receiver away from children’s reach. It contains small parts that may come off the unit and cause suffocation. Follow all safety regulations for electronic devices and turn off electrical devices or RF products when requested. This product uses a lithium battery. Keep away from fires and high temperatures.
Charging the Battery It takes about two hours to charge the battery to full level. First, connect the mini-USB connector of the USB cable to the USB port on the GP-102. Next, connect the end of the USB cable to an adaptor or the USB port of your PC or laptop. When charging is in progress, the charging indicator (blue) will always be illuminated. When the battery is full, the charging indicator will turn off. Then, remove the USB cable from the GP-102. Canmore Corporation www.canmore.com.
Battery Warning If you do not follow the instructions below, you may risk shortening the battery life and causing a fire, chemical burn, electrolyte leakage or other damage. 1. Operating temperature :-10°C to 60°C (-4°F to 140°F) Charging temperature: 0°C to 45°C (32°F to 113°F), using GP-102. 2. Storage temperature: -20°C to 65°C (14°F ~ 113°F). Charging Power Supply To ensure safety, please charge your GP-102 with the following power sources: Standard PC or laptop USB port.
FAQ Q1: Why can’t I find my position with my GP-102? A1: Please make sure that you are using your GP-102 in open sky and the LCD screen is facing upward. Q2: Why does my GP-102 sometimes work very fast and sometimes very slowly? A2: If you have used your GP-102 in open sky within the past two hours, it works really fast; otherwise, you will need to wait for 30-40 seconds to find your position.
Concerning of Poor GPS Signal It is possible unable to receive GPS signal or signal low in these places: Inside the tunnel, GPS signal is blocked. Beside some buildings, GPS signal is low or disturbed. Covers above, GPS signal are blocked. Inside forests, or too many covers, GPS signal is low or disturbed. Inside buildings, GPS signal is blocked. If you use the USB GPS Receiver inside the car, some anti-sunlight windscreen film will make the GPS signal degraded or signal blank.
Used equipment must be disposed of in compliance with current environmental protection regulations. You should return it to your reseller or dispose of it in an approved recycling centre. DECLARATION: We hereby declare that this product complies with essential requirements and other related requirements, of the 1999/5/EC R&TTE directive and particularly with article 3 sections 1a, 1b and 3. Canmore Corporation www.canmore.com.
Warranty Card Thank you for purchasing CANMORE products. The GP-102 is a portable GPS tracker independently developed by CANMORE. Before shipping out of the factory, each unit has been tested to comply with related quality and regulatory requirements. CanMore provides the following warranty for this product. 1. CanMore shall provide one year free repair and maintenance service as of the date of purchase for product failures from normal use. 2. The exceptions of the warranty shall include: A.
