User manual

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).

All rights including translation reserved. Reproduction by any method, e.g. photocopy, microﬁlming, or the capture in electronic data

processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent

the technical status at the time of printing.

Tips and notes

• Regularly back up your data.

• Operating the product does not require any driver software. The computer recogni-

zes the product including the mSATA SSD attached therein as a normal SATA hard

drive or SATA SSD.

• Same as for common SDDs, you should make sure to keep 20 - 30% of the mSATA

SSDs storage unused.

- For example, if you created a single 30 GB partition on a 30 GB mSATA SSD, you

should only store data amounting to 24 GB, in order not to reduce the transfer

speed too much.

- Search the Internet or appropriate technical literature for more information on

that.

Disposal

Electronic devices are recyclable waste and must not be disposed of in the

household waste.

At the end of its service life, dispose of the product according to the relevant

statutory regulations.

You thus fulﬁl your statutory obligations and contribute to the protection of

the environment.

Technical data

System requirements ........................ Windows

XP SP3 and higher, Mac OS, Linux

Compatible with.................................. SATA I, II, III

Operating conditions ......................... +5 °C to +50 °C, 20 - 80% RH

Storage conditions............................. -25 °C to +70 °C, 15 - 90% RH

Dimensions (W x H x D)..................... 98 x 7 x 70 mm

Weight .................................................. 54 g