User manual

33
b) Installation in the Radio Slot
• Removethefrontcontrolpanel.
• Carefullyremovetheplasticframeinthefrontofthesystembybendingitslightlytotheoutsideandpullingitoff
from the unit.
• RemovethetwolockingscrewsoftheCDdrive(g.1,no.1).
• Unlocktheinstallationframewiththetwounlockingkeys(g.1,item2).
• Removetheinstallationframetowardsthebackofthesystem(g.1,item3).
• Inserttheframeintotherespectivecut-outinthevehicle(gure2).
• Benddownsomeclipsintheinstallationframeuntiltheframeissecurelyfastenedintherecess(gure3).
• Whenyouhavemadealltheelectricalcontacts(see"ElectricConnection")insertthedeviceintotheframeuntilit
locksin(gure4).Ensurethatthedeviceispushedintotheinstallationframetherightawayaround(thecontacts
for the front control panel must be at the bottom).
• Pushtheplasticframeatthedevicefrontontothedeviceagain.
Keep the two unlocking keys. You will need them for a later removal of the device.
• Additionallyprotectthedevicefromvibrationswiththeenclosedbolt,whichyoucanattachtothebackoftheunit.
• Inmostvehicles,suchasafetyfasteningisprovidedfor.Ifthisisnotthecaseinyourcar,fastenthedevicewitha
punched metal strip.
Forthefastening,proceedasshowninthefollowinggure: