Instructions

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represents the technical status at the time of printing.
Copyright 2020 by Conrad Electronic SE. *2201950_v1_0120_02_JC_m_en
Proceed as follows to extend the Micro USB plug:
- Use your ngernail to pull Notch 1 carefully downwards. Notch 2 is now exposed.
- Use your ngernail to pull Notch 2 carefully downwards.
- The Micro USB plug is now ready for use.
Proceed as follows to retract the Micro USB plug again:
- Press the blue lock.
- Carefully slide the Micro USB plug inwards until it is completely hidden.
Notch 1
Lock
Notch 2
Resolution
Briey press the DPI button on the top of the mouse to adjust the resolution and
thus change the pointer speed.
Move the mouse pointer evenly back and forth. This will allow you to tell the
difference between the 3 available settings.
Power saving/sleep mode
The mouse enters into power saving mode when:
- the USB receiver is not plugged in,
- the USB receiver is not supplied with power or
- the mouse has not been used for 30 minutes.
After 8 additional minutes, the mouse will enter into sleep mode.
Use the scroll wheel or press a key to “wake up” the mouse.
Surfaces
The mouse's optical motion sensor may not work on some surfaces. No movement
will be detected when the mouse is used on reective surfaces or glass.
If the cursor does not move, try placing the mouse on a suitable mouse pad.
Please note that the mouse may leave marks on delicate surfaces.
Troubleshooting
If the mouse is not working, try one of the following solutions:
Replace the batteries.
If the LED light on the bottom of the mouse does not light up after changing the
batteries, disconnect the USB receiver from the USB port and reconnect it.
Then place the mouse at a distance of 10 cm to the USB receiver.
Remove and reinsert the batteries.
If the LED on the bottom of the mouse lights up, you can continue using the mouse.
Care and cleaning
Never use aggressive detergents, rubbing alcohol or other chemical solutions, as
these could damage the casing or cause the product to malfunction.
Do not immerse the product in water.
If the cursor doesn't move properly after you have used the mouse for a long period
of time, check whether the sensor on the bottom of the mouse is dirty. Use a soft,
clean brush or blow on the sensor to clean it.
Use a dry, lint-free cloth to clean the product.
Declaration of conformity (DOC)
Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau hereby declares
that this product conforms to the 2014/53/EU directive.
Click on the following link to read the full text of the EU declaration of
conformity: www.conrad.com/downloads
Select a language by clicking on a ag symbol, and then enter the product
order number in the search box. The EU Declaration of Conformity is
available for download in PDF format.
Disposal
a) Product
Electronic devices are recyclable waste and must not be disposed of in
household waste. Always dispose of the product according to the relevant
statutory regulations.
Remove any inserted batteries and dispose of them separately from the
product.
b) (Rechargeable) batteries
You as the end user are required by law to return all used batteries.
Batteries must not be placed in household waste.
Batteries containing hazardous substances are labelled with this symbol to
indicate that disposal in household waste is forbidden. The abbreviations
for heavy metals in batteries are: Cd = Cadmium, Hg = Mercury, Pb = Lead
(indicated on the battery, e.g. below the trash icon on the left).
Used (rechargeable) batteries can be returned to local collection points, our stores
or battery retailers.
You thus full your statutory obligations and contribute to the protection of the
environment.
Technical data
Power supply ........................... 2x AAA battery
System requirements ............... Windows
®
2000, XP (Home, Pro, with SP1, SP2,
SP3, 32 bit only), Vista™ (32/64 bit), 7 (32/64 bit),
8.0 (32/64 bit), 8.1 (32/64 bit), 10 (32/64 bit)
Mac OS 10.1.1 and above
OTG-enabled Android smartphones/tablets
Windows
®
Phone
Resolution ................................ 1000 / 1200 / 1600 dpi
Wireless frequency .................. 2.4GHz
Transmission power................. 0 dBm
Range ...................................... max. 10 m
Operating/storage conditions ... -5 to +40 °C, 20 – 90% RH
Dimensions (W x H x D) .......... 58.5 mm x 36 mm x 89.5 mm
Weight ..................................... 48 g (without batteries)