Manual

9
Setup Before Copy
There are several sub-functions related to copy results, which can be adjusted in
function [7. Setup] before copying.
1. Copy Area Settings [7.Setup >> Copy Area]
➊ Copy Area: System and Files
Also known as "Quick Copy”. The source’s format is automatically analyzed and if
it’s recognizable, such as, FAT 16/32/64, NTFS, or Linux ext. 2/3/4, the system
will copy the data only, rather than the entire flash.
Note
If the file format is not recognized, the whole flash card,
including empty space, will be copied even if you specify copy
area in “System and Files”.
➋ Copy Area: Whole Media
The system will copy the whole flash card, including empty space and format.
This function is useful when users want to copy the whole flash or have a flash
source with an unknown format. "Whole media" copies take a bit longer to
complete.
2. Target Tolerance Settings [7.Setup >> Target Tolerance]
This function sets the capacities tolerance range between the source and target
flash. If the capacity is outside the tolerance range, the copy will fail.
Copies 2GB data only
[Copy Area]
System and Files
[Copy Area]
Whole Media
8GB
Copy total 8GB