Manual

11
5. Auto Start After Fill Device
Sets auto start of copy/compare task upon insertion of all targets. Users can also
choose to confirm tasks first by pressing “Ok”.
How to Prevent from Failed Duplication
1. Stable Devices
➊ Good Connection
The adapter, extension cord, and card reader must all be in good condition for
secure connection.
➋ Stable Flash
Use a decent quality flash device.
➌ Good Source
Make sure your source is also of decent quality.
2. Suitable Data & Settings
➊ Target Tolerance Settings. [7. Setup >> Target Tolerance]
"Target Tolerance" checks the setting capacity range difference between source
and target.
[Target Tolerance]
No Limit
[Auto Start After Fill Device]
Yes, auto start