Manual

14
Note
l This function will not alter the content or format.
l You can set the checking range in [6.3. Media Check >> Setup
Range].
2. H5 RW 100%
This function will read and write the flash media to assess its quality. After
executing this function, the flash’s bad sector quantity and reading and writing
speed will be displayed.
Scroll to view the status of each port.
Note
l This function will alter the content and format of flash media,
please do not execute this function if there is important data
stored in it.
l The flash card will be formatted at FAT 16/32 once testing is
complete.
l To protect source data, the system will not execute this
function on the master device.
3. H6 SafeRW
This function will read and write the flash media empty space to assess its
quality. Select [4.3 H6 SafeRW] and press "OK" to start this function. After
finishing this task, the system will display the test result.
Note
l This function supports FAT16/32 format only.
l This function will NOT alter the flash’s content.
!
[#02] Bad: 0 3871M
W:7.2 M/s 255M
.
Bad Sector
Test Capacity
Writing Speed
Tested Capacity
[#02] Bad:0 3871M
W: 7.2M/s R:14.2M/s
Pass:1 H6 Safe Test
Fail: 0 0