Manual

15
4. Settings
➊ Setup Range %
This function sets the quality check capacity range. Scroll to set the range from 1
to 100%. The higher the percentage, the longer it will take.
➋ Setup Range MB
This function sets the quality check capacity range in MB. Scroll to set the range
from 1MB to 9000MB.
Note
The duplicator will abide by whichever was set last, if both
Range% and Range MB are set.
➌ Setup Error Limit
This function sets the error tolerance range while checking the flash. Scroll to
set the error limit value. Select which units to use (KB or MB), then select the
value.
Note
When the red-light illuminates to indicate that an error has
occurred, scroll to view the error information.
[Setup Range]
100%
[Setup Range MB]
2000MB
[Setup Unit]
MB
[Setup Error Limit]
9000MB