Manual

16
How to check Flash quality – more tools
1. Measure Speed [6. Utility >> Measure Speed]
This function measures the read and write flash media speed.
(1) Plug flash media into the slot, select function [6.2 Measure Speed], then
press "OK" to start this function.
(2) Scroll keys to view the exact Read and Write flash media speed on each port.
Note
l To protect source data, the system will not execute “Measure
Speed” on the master device.
l The function may alter the format and data content of flash.
2. Capacity Check [4
.
Capacity Check]
This function can quickly check the real capacity if it’s claimed.
(1) Plug in flash media, select function [4. Capacity Check], then press "OK".
It will take about 3 seconds to determine the exact capacity.
(2) System will show the checking result by use of Green/Red LED light.
(3) Scroll buttons to check the status of each slot.
Note
l This function supports asynchronous operation; you can
continually plug and unplug flash media without having to
push any buttons.
l The function may alter the data content and format of flash.
l To protect source data, the system will not run a Capacity
Check on the master device.
l When the red error light illuminates, scroll to view error
information.
[Utility]
2. Measure Speed
[#02] Read: 14.7MB
Write: 7.0MB
[#02] SIZE: 3781M
Capacity OK
[#04] SIZE: 8M
BAD!
Green Light: Capacity OK
Red Light: Error