Manual

17
Format the Flash Card
Caution
User is responsible for verification of targets’ quality. Testing a
few completed targets in a mass production environment for
quality control is recommended.
1. Auto Format [6. Utility >> Do Format]
This function formats flash into FAT. Plug in the flash media and press "OK". The
system will automatically detect its capacity, then format the media per its
capacity.
l If the flash media format is already FAT16 or FAT32, the format function
won’t alter its original format.
l If the original flash media is not FAT format, i.e. NTFS, Linux or FAT multi-
partition.
The system will format per flash’s capacity. If capacity is above 2GB, the
system will format the flash to FAT32 and below 2GB, the system will format
the flash to FAT16.
Capacity < 2GB
Format FAT16
Capacity > 2GB
Format FAT32
Note
The source port will not perform any formatting because this
function will delete the flash media’s data.
2. FAT16 Format
Sets the FAT16 format.
3. FAT32 Format
Sets the FAT32 format.
4. Set FAT16 Cluster Size
Sets the FAT16 cluster size.