Manual

21
4. Purge Before Copy
This setting clears out the target devices’ content and format before copying.
Note
This function will erase the flash media’s data and format.
5. Monitor Device After Copy
Allows user to set a device status check after duplication. The settings could
show different results because each device has various settings.
For example, if a device is set to power off automatically after “complete”
command, then user must set “Do NOT Check” to make sure the LCD keeps the
copy result for reference.
In this case, if set at “Do Check”, the copied device will power off automatically
after Copy job completes and the LCD will back to the previous job.
6. Set to Default
Restores original default settings.
[Purge Before Copy]
Disable
[Monitor Device After Copy]
Do Check
Total OK: 2 NG: 0
12:48 OK: 2 NG: 0
[Monitor Device After Copy]
Do NOT Check
1. Copy (Data)
Complete
All Parameter was cleared!