Manual

4
Function Table
Function
Description
1. Copy
Data or whole media duplication only.
2. Compare
Bit by bit comparison between the source and target flash medias.
3. Copy+Compare
First copies, then compares the target to the source once
duplication is completed.
4. Capacity Check
Checks the real capacity of the flash.
5. Information
5.1 SD Card Info.
Displays flash’s data info, such as file format, content size, and
capacity.
5.2 System Info.
Displays duplicator’s system info, such as model number and
software version.
6. Utility
6.1 Do Format
6.1.1 Auto Format
Auto formats media to FAT16 or 32.
6.1.2 FAT16 Format
Formats media to FAT16.
6.1.3 FAT32 Format
Formats media to FAT32.
6.1.4 Set FAT 16 Cluster Size
Sets FAT16 Cluster size.
6.1.5 Set FAT 32 Cluster Size
Sets FAT 32 Cluster size.
6.2 Measure Speed
Measures the flash reading and writing speed. This function will
damage the format and content.
6.3 Media Check
6.3.1 H3 Safe
Checks the flash’s quality by reading it.
This safe check will not change the
flash’s content or format.
6.3.2 H5 RW
Checks the flash’s quality by reading and
writing. This function will change the
flash’s content and format.
6.3.3 H6 SafeRW
Checks the flash’s quality by writing and
reading its empty space. This function
will not change the flash’s content or
format.