Manual

5
6.3.4 Setup Range %
Sets the flash’s checking range
percentage.
6.3.5 Setup Range MB
Sets the flash’s checking range in MB.
6.3.6 Set Error Limit
Sets the error tolerance range when
checking the flash. (Units: Sector/KB/MB)
6.4 Quick Erase
Erases the flash media’s content. It will keep the FAT format.
6.5 Full Erase
Completely erases the flash’s data, bit by bit, including format and
content.
6.6 DoD Erase
Erases flash three times complying with USA Department of
Defense (DoD) standards.
6.7 System Update
Updates system firmware via the flash media.
6.8 Calc. Checksum
Calculates the source’s flash media Checksum value.
7. Setup
7.1 Start-up Menu
Selects which function is first displayed when powered on.
7.2 Copy Area
7.2.1 System and Files
Automatically analyzes source data’s format
and copies only the data area.
7.2.2 Whole Media
Copies the entire flash content, including the
empty space.
7.3 Button Sound
Enables or disables the audible beep when a button is pressed.
7.4 Target Tolerance
Sets the range of capacity gap tolerance between the source and
target. Default setting is “No limit”.
7.5 Asynchronous
Enable opens Asynchronous function. Disable closes this function.
7.6 Check Before Copy
Checks flash media check before copying.