Manual

7
Start to Copy
Before executing this function, please read “copy setup” to better understand
the copy process and results.
1. Copy
➊ Copy Area
Copy area
setting [7. Setup >> Copy Area]
Before duplication, select the data area with "Copy area".
Select "System and Files"
Select "Whole Media"
➋ Asynchronous Copy
Copy mode setting [7. Setup >> Asynchronous]
Select "Enable" or "Disable" asynchronous.
Note
l If flash card is removed during copy process, the system will
stop immediately and the red light will illuminate to notify
user the copy has failed. Removing the flash card during copy
is strongly discouraged as it will damage the flash card.
l Backup the data on target flash cards before starting the
copying process as any pre-existing data will be lost once copy
is complete.
2016 11/10 11:26:31
1. Copy (Data)
Copy 7695M
3% 0:27 (3) 270M
(3) indicates Port #3 is the slowest.
1. Copy (Data)
1. Copy (Whole)