Manual

8
2. Compare
The compare function checks the accuracy of copy result. After the copy
finishes, go to function 2 and press "OK" to start compare process.
3. Copy+Compare
This function is the most convenient. Instead of going to function [2.Compare]
and pressing "OK" after copy finishes. Function [3.Copy+Compare] will
automatically run the compare function after copy process is finished to make
sure the copied result is accurate.
n How to stop above jobs during operating:
➊ Stop Single Port:
Press↑↓simultaneously for 5 seconds to stop the slowest port during
operation.
➋ Stop All Ports:
Press and hold “ESC” for 5 seconds to terminate operation on all ports.
2016 11/10 11:36:15
2. Compare
2016 11/10 11:36:15
3.Copy+Compare
Copy 7695M
3% 0:27 (3) 270M
Port 3 is the slowest in this Copy job.