Information

ManualsBrandsRENKFORCE ManualsTablet AccessoriesTablet PC stand Compatible with (tablet PC brand): Universal

• Do not use any force when moving/adjusting the tablet/tablet stand, otherwise you may

damage the tablet.

• Do not overload the tablet stand. Refer to the maximum tablet weight/size stated by

the manufacturer.

• Do not hold onto the tablet stand or use it to support yourself.

• Do not secure any objects to the tablet stand other than a tablet.

• If you are in any doubt, do not install the stand yourself; ask a qualied technician to do it

for you.

• Tablets generate heat. Fire hazard! Take appropriate precautions to ensure heat

dissipation and prevent the risk of a re. Certain surfaces may be damaged or discoloured

due to heat dissipation. Take appropriate protective measures.

Care and cleaning

• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these may

damage the housing or cause the product to malfunction.

• Use a dry, lint-free cloth to clean the product.

Important information

General safety instructions for tablet stands

Dear customer,

Tablet stands provide enhanced ergonomics and protect against theft when they are equipped

with a locking mechanism.

Depending on the model, the tablet height and position can be adjusted and you can rotate/

turn the tablet to suit your needs.

There are a few important safety instructions which must be observed during installation, so

please read the following sections carefully.

General information

• The device is not a toy. Keep it out of the reach of children and pets.

• Do not leave packaging material unattended, as it may become a dangerous toy for children.

• Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity

and moisture.

• Do not place the product under any mechanical stress.

• If it is no longer possible to operate the product safely, stop using it and prevent unauthorized

use. Safe operation can no longer be guaranteed if the product:

- is visibly damaged,

- is no longer working properly,

- has been stored for extended periods in poor ambient conditions or

- has been subjected to any serious transport-related stress.

• Always handle the product carefully. Jolts, impacts or a fall even from a low height may

damage the product.

• Check the contents of the packaging before assembling the product. Do not assemble the

product if any parts are missing.

• Depending on the design, the tablet stand can be xed to a oor or placed on a table.

• The rubber feet on free-standing tablet stands may produce scratch marks on sensitive

surfaces. Protect such surfaces using a suitable mat.

• The product may move when it is placed on a surface/table, even if it has rubber feet. You

may need to use a self-adhesive strip to prevent slipping.

• Installing the product in an unsuitable location may lead to personal injury or damage to

property!

• The tablet stand is only designed for use in sheltered indoor spaces, unless otherwise stated.

• Plan the mounting location carefully so that the tablet stand will be located in the desired

position once you have nished mounting it.

• Proceed with care when assembling and installing the product. The product has sharp edges

which have the potential to cause injury!

• Only carry out the work necessary to mount (or adjust) the tablet stand. Never attempt to

dismantle, convert or repair the tablet stand.

• Before beginning the installation process, check that your tablet ts into the clamp on the

stand. If not, consult a technician for advice.

• Work on a clean, soft and dry surface. Protect valuable furniture using a suitable pad or cloth.

• Ensure that you use the correct screws when xing the stand in place. The screws for the

tablet stand are usually included, but you may need to purchase other screws (depending

on the product).

• Do not attach the stand to unsuitable oor surfaces. Thin or laminate ooring is normally

unsuitable. However, special parts are sometimes available for these types of surfaces. If in

doubt, contact a specialist before assembling the product.

• Do not use any force when tightening screws, otherwise you may damage the tablet stand

and void the warranty!

• Carefully mount/place the product according to the instructions, otherwise the tablet stand

may cause injury or damage to property if it falls off the installation surface.

• Ensure that no unauthorized persons are present when mounting the product.

• Ensure that no cables or wires are damaged when drilling holes or tightening screws.

Accidentally drilling into electrical cables can cause a fatal electric shock!

Use appropriate safety measures when using electric tools (e.g. a drill). Wear safety goggles.

• When laying cables, ensure that they do not get jammed or bent in the tablet stand.

• Check that all of the screws are securely in place from time to time (approximately every

3 months). The screws may become loose over time as the tablet stand is moved around.

• Do not overtighten the screws. This may damage the threads and reduce the strength of

the tting.

This document is published by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).

All rights including translation reserved. Reproduction by any method (e.g. photocopying, microlming, or the capture in

electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.

This publication represent the technical status at the time of printing.