User manual

37
19Brightnesslevelscanbesetinthepowersavingmode.Theycanbeidentiedfromtheindividuallevelsofthe
setting bar.
“Turn On”
UsethisoptiontosettheLCdisplay(2)brightness.19Brightnesslevelscanbesetinthemode‘Enable’.Theycan
beidentiedfromtheindividuallevelsofthesettingbar.
“Display”
SetthecolourmodeoftheLC-display(2)usingthisoption.Colour->andmonochromaticareavailable.Toapplya
settingafterselection,themenuoptionmustbeconrmedwiththeOK button (N).
“Power management”
Usethisoptiontosetthepowersavingmode.Youcanchoosefromthefollowingtimes:Poweroff,5,15or30minutes.
Select the desired time period by pressing the (O and 5) or (G and 6) buttons or with the DIAL/SELECT (3) knob.
Conrmyourselectionwiththe OK button (N) or by pressing the DIAL /SELECT (3) button.
“Sleep timer”
Usethismenuoptiontocongurethesleeptimer.Theradiowillswitchoffautomaticallywhenthepre-settimehas
elapsed.Youcanselectatimeofupto180minutesin15-minuteintervalseach.
“Buffer”
Use this option to select a cache buffer of 2, 4 or 8 seconds for the radio station.
Select the desired time period by pressing the (O and 5) or (G and 6) buttons or with the DIAL/SELECT (3) knob.
ConrmyourselectionwiththeOK button (N) or by pressing the DIAL /SELECT (3) button.
“Weather”
Thesesub-menuoptionsareavailableinthemenu:SetLocation->Temperatureunit->Showonstandby
“Set Location”
Use this menu to select the city for which you want to view weather data in standby mode. First select the desired
continent, and then select the country and city. To add this to the display, press the OK button (N and 3) while the
weatherofthecurrentcityisbeingdisplayed.ThenconrmagainwiththeOK button (N and 3)
“Temperature unit”
Use this option to select between Celsius (°C) and Fahrenheit (°F) for the display of temperature.
“Show on standby”
Choose whether to display weather information when the radio is in standby mode. When enabled, the display
switches between the time and weather information when the radio is in standby mode.
“Local Radio Setup”
Youcanmanuallyadjusttheautomaticselectionforthe“Localstation”here.First,select“ManualSetup(Country)”or
“ManualSetup(State)orManualSetup(City)“.Thenselectyourcontinentandthedesiredcountry.Toapply,conrm
“Save as Local Radio” with the OK button (N and 3).
If you select “Auto Detect (Country)”, the device determines your current location automatically and displays the
available stations.
“Playback Setup”
Use this option to select whether the tracks should be repeated individually during playback or whether they should
be played randomly. Select "off" to cancel repeat.