User manual

c) DAB-operation
First scan
• AfterrstactivationoftheDABmode,thedevicewillautomaticallyperformastationscanin
the DAB reception range. During the search, the display information shows progress and the
number of stations found.
• Aftercompletionofthestationscan,therststationinthestationlistisplayedback.
If no stations are found, no signal could be received. In this case, move the device
or align the aerial (14) differently, and perform the station scan again. Check if DAB
stations are broadcast in your area.
Station selection from the station list
• Push the buttons (9) or (10) to show the station list in the display (12).
• Select the desired station with the buttons (9) and (10).
• Conrmyourselectionbypushingthedialswitch(11).
Station memory
• The device can save up to 10 DAB stations.
• Select other DAB station to be saved as described above.
• Press and hold the button (8) until the list of the station memory appears in the
display (12).
For empty station slots, no station name is displayed; if the station slot is already
occupied, the name of the station saved there is displayed.
• Use the button (9) or (10)toselectthedesiredmemoryslotandconrmtheselection
by pushing the dial switch (11).
• To delete a saved station, just save another station on its memory slot.
Selecting saved stations
• Push the button (8)brieyandthenusethebuttons (9) or (10) to select the desired
station.
• Conrmyourselectionby pushing the dial switch (11).
When no station is saved on the chosen station button, the currently set station will
continue to play.
34