User manual

d) FM operation

Manual station search

• Brieypush the button (9) or (10) to change the reception frequency step by step.

• Every push of a button changes the reception frequency in steps of 50 kHz.

Automatic station search run

• Push the button (9) or (10) buttons and keep it pushed until the station scan starts.

• IfaFMstationwithsufcientlystrongsignalisfound,thescanstopsandthestationisplayed

back.

Please set weaker stations by manual station selection.

 Usethemenutosetiftheautomaticstationscanistondonlystrongstationsorall

stations. Scanning for all stations may lead to the station scan stopping after every

frequency stop in some broadcasting areas. In this case, set the search setting to

strong stations only.

Station memory

• The device can save up to 10 FM stations.

• The station memory, selection of the stored stations and deletion of stored stations works the

same as described for DAB mode.

Calling station information

• Push the INFO button (6) to display various types of information on the station on the display.

• Push the INFO button (6) once more to move to the next display.

• The contents of the displayed information depend on the station.