User manual

Further operating options can be found in the menu

• Push the button MENU (5) to display the menu.

• The following menu items refer to FM operation.

Scan Setting Specieswhether thestationscan istondonlystrongstations

or all stations.

Audio Setting Specieswhetheraudioisreceivedinmonoorstereo.

For weak stations, mono reception is recommended, since this

produces less noise.

e) Bluetooth

operation

Before transmission between your Bluetooth

device and the radio is possible, both devices

must be coupled. This process is called "pairing".

If you have already coupled to a Bluetooth

device before, this connection will be

restored automatically when both devices are in range and Bluetooth

operation has

been selected on the radio. "Pairing" does not have to be repeated. This function may

need to be activated in your Bluetooth

device, however.

• Push the MODE (2) button to display the selection menu for the different operating modes.

• Use the buttons (9) or (10) to select the operating mode BLUETOOTH

and push the

dial switch (11).

• Switch your Bluetooth

device to which you want to connect the radio on and activate the

pairing mode here (see instructions of the corresponding device). The device scans for

Bluetooth

devices in the reception range.

• When the radio was found, your Bluetooth

deviceshowsitsname(RF-DAB-RETRO1).

• Select the radio at your Bluetooth

device.

• Start playback on your Bluetooth

device.

• Playback now takes place using the radio.

• Push the buttons (9) or (10) buttons to jump one track forward or backward.

• Push the dial switch (11) to interrupt or restart playback.