Installation Guide 1. Installing the software of VisualTable ............... 2 2. Checking image before OCR installation ....... 3 3. Installing & Verifying OCR .............................. 4 4. Installation Precautions ............................... 7 5. Precautions to take before reformatting PC ..
VisualTable Installation Guide 1. Installing the software of VisualTable Insert the VisualTable Set-up CD to your computer CD-ROM. If your computer does not meet the system specifications that VisualTable requires, there may be difficulties using VisualTable. Since OCR license can be registered only one time, you should check whether the projected image appears before registering the OCR license.
VisualTable Installation Guide 2. Checking image before OCR installation (1) Connect VisualTable and run VisualTable program. VisualTable ① Turn on your PC power and check all the connections of the USB cable, power cable and power adaptor of the VisualTable to the PC. Start the program 30 seconds after connecting the USB cable. ② Double click the “VisualTable” icon on the PC screen or in the start menu in the PC screen corner.
VisualTable Installation Guide 3. Installing & Verifying OCR Since OCR license can be registered only one time, you should check whether the projected image appears before registering the OCR license (Refer to “2. Checking image before OCR installation”). In the event of your negligence of the above instruction, supplier has no responsibility for the related OCR issue. Make sure that the Internet is connected before starting the installation.
VisualTable Installation Guide ⑦ Click "Finish" to complete the Microsoft ⑧ Click "Next" to install Sentinel License Visual C++ installation. Manager. ⑨ Check "I accept the terms in this license ⑩ Click "Next." agreement." and click "Next." ⑫ Click “Next.” ⑪ Click "Next.
VisualTable Installation Guide ⑬ Click “Next.” ⑭ Click “Install.” ⑮ Please wait while the installation continues. Click "Finish" to complete the Sentinel Click "Finish" to complete the OCR License Manager installation. Enter the OCR serial number on the back of the case cover of the Set-up CD. Click "Register" and wait a few seconds until the registration is complete. Certification Program.
VisualTable Installation Guide 4. Installation Precautions Compatible OS Installing OCR Genuine validation Connecting the device Reinstallation VisualTable runs on Microsoft Windows XP(32 bit), Windows Vista, and Windows 7 and above (32 bit & 64 bit). The following specifications are required: Microsoft .NET FrameWork 3.5 or above, USB 2.
VisualTable Installation Guide 5. Precautions to take before reformatting PC Only one validation attempt is allowed per license of OCR. If you need to reformat your PC, please refer to following instructions to back up the license information of your OCR. In the event of your negligence of this instruction, supplier has no responsibility for the related OCR issue. (1) If you want to reinstall on the same PC after reformatting the PC.